ARGO FET 100Amp 3 Battery Isolators
Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.
In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.
When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Care should taken however to keep cable lengths short and of sufficient cross section.
When a current of 100 A flows through a cable of 50 mm˛ cross section (AWG 0) and 10 m length, the voltage drop over the cable will be 0,26 Volt. Similarly a current of 50 A through a cable of 10 mm˛ cross section (AWG 7) and 5 m length will result in a voltage drop of 0,35 Volt.
|Electrical Characteristics |
|Maximum charge current ||100 A |
|Maximum alternator current ||100 A |
|Number of batteries ||3 |
|Connection ||M8 Studs |
|Mechanical Characteristics |
|Weight ||1.2 kg |
|Dimensions ||60H x 120W x 150D mm |
Downloads and Manuals
This product was added to our catalog on Wednesday 10 January, 2007.