BP 165Watt 24Volt Monocrystalline Solar Panel with Junction Box

 

The BP 4165 is an advanced 165W module utilising monocrystalline cells with anti-reflective SiN coating. The BP 4165 has been especially designed for grid connect applications such as large commercial roofs, residential systems, photovoltaic power plants along with remote off-grid applications such as telecommunications, water pumping and home systems. This 72 cell module offers a superior price – performance, with a white polyester back sheet and innovative, larger high-efficiency cells, providing superior power density.

 

Warranty

 

• 90% of minimum warranted power output over 12 years
• 80% of minimum warranted power output over 25 years
• Free from defects in materials and workmanship for 5 years

Technical Specifications

 

Electrical Characteristics
Rated Power - Pmax¹	165 W
Warranted minimum power	160 W
Nominal voltage	24 V
Voltage at Pmax - Vmp	34.3 V
Current at Pmax - Imp	4.8 A
Short circuit current - Isc	5.4 A
Open circuit voltage - Voc	43.7 V
Maximum series fuse rating	15A (BP 4175S) / 20A (BP4175J)
Maximum system voltage	600V (IEC 61215 rating)
Mechanical Characteristics
Dimensions	1593 x 790 x 50 mm
Weight	15.4 kg
Frame	Clear anodized aluminium alloy type 6063T6
Solar cells	72 cells
Diodes	Three 9A, 45V Schottky by pass diodes includes.
Output cables	RHW AWG# 12 (4mm²) cable with polarised weatherproof DC rated MC III connectors
Junction box	IP65 junction box with four terminal screw connection block
Construction	Front: high transmission 3 mm tempered anti-reflective coated glass Rear:white polyester; encapsulany EVA
Temperature Coefficient
Temperature coefficient of Isc	0.065 ± 0.015 % / °C
Temperature coefficient of Voc	-(160 ± 20) mV / °C
Temperature coefficient of Pmax	-(0.5 ± 0.05 ) % / °C
NOCT²	47±2°C

1.Standard test condition STC, irrandiance of 1000W/m² at an AM 1.5G solar spectrum and a cell temperature of 25°C
2.Normal operating cell temperature (NOCT) air temperature of 20°C; irradiance 800W/m²; wind speed 1m/s.

Configuration

 

BP 4165S Universal frame, a sealed junction box with output cables and polarised Multi-Contact MC connectors
BP 4165J Universal frame with an accessible junction box for cable connection.

 

Qualification Test Parameters

 

Temperature cycling range	-40°C to +85°C
Damp heat test	85°C and 85°C relative humidity
Front and rear static load test	2400Pa
Front load test	5400Pa
Hailstone impact test	25 mm hail at 23m/s

Quality and Safety

 

• Manufactured in ISO 9001 and ISO 14001 certified factories
• Conform to European Community Directive 89/33/EEC, 73/23/EEC, 93/68/EEC
• Certified to IEC 61215