Conergy Suntop III Roof Mounting Kit for Two Solar Modules - 40W to 230W
Note: Please specify solar panel type and roof type from check boxes above before purchasing this mounting kit.
Conergy SunTop III is a revolutionary system for PV modules on pitched roofs. It combines over 10 years of field experience and German engineering to form a unique, patented aluminium base rails and Quickstone technology to enable easier and faster installations.
Elegant Simplicity
With the Quickstone technology, the SunTop III offers both an elegant yet simple installation solution which can be mounted easily on any pitched roof with almost every kind of roof material. Once the fixing points are installed, the only installation tool you'll ever need is a simple Allen key.
Significant Savings
The SunTop III system's unique engineering and high level of pre assembly will reduce your installation time significantly, as much as 40 % in some cases. Additionally, with only a few rail lengths and the adjustable telescopic end piece, the SunTop III reduces inventory costs and hassles as well.
Extensive Module Compatibility
Almost every type of framed module available can be used with the SunTop III system.
Excellent Adaptability
The height adjustment of the base rails allows a level PV array to be established, no matter how uneven the roof.
Engineered to High Standards
The SunTop III system design guidelines enable code-compliant installation in all wind regions in Australia. The SunTop III design tool removes the need for detailed, manual calculations; simply choose your appropriate terrain category and other parameters and the planning aid will provide you with a complete design to comply with AS/NZS 1170.
Guaranteed Durability
All components are made of extruded aluminium and stainless steel. The high corrosion resistance ensures a long life span.
Roof Mounting Kit Components
- 4 x Module clamps
- 4 x Feet for tin or title roof
- 2 x Base rails to suit 1 large solar module
- Bolts & washers
Warranty
- 10 years warranty on materials durability
Technical Specifications
| Installation site | Pitched roof - retrofit |
| Roof cladding | Suitable for most types of roof cladding |
| Roof slope | Up to 60 degrees* |
| Building height | Up to 20m |
| Maximum wind load | Up to 20m Depending on wind region, to be verified by structural engineer |
| Snow load | Up to 1.4KN/m |
| PV modules | Framed |
| Module arrangement | In rows or column ** |
| Module orientation | Land scape or portrait |
| Size of the module array | Any *** |
| Position of the module array | As required by the size |
| Possible height | Up to 38 mm standard |
| Compensation | 63mm with optional extension plate |
| Roof hook separation | Up to 2.5m depending on site, building height, fastening system and module used |
| Support rail | Extruded Aluminium (ENAW 6060/6063) |
| Roof hooks, small parts | Stainless steel and extruded aluminium |
| Colour | Aluminium |
* Valid for three tab shingles and roof titles. With metal roofing or similar large surface area cladding and roof slopes greater than 60?, please contact us in the early stages of your planning.
** According to the orientation of the base rail.
*** Because of the stresses in the rail string caused by temperature expansion, we recommend a maximum length of 10m per module array.
Please be aware of the higher levels on wind loads when installing on the corners and edges of a roof.
Quality and Safety
- Comply AS/NZS 1170 Standard
This product was added to our catalog on Tuesday 30 November, 1999.
