Energy Matters 130Watt 12Volt Solar Power Kit for Camper
Energy Matters designs a 130Watt 12Volt solar kit used for remote area. This solar kit is perfect for the camper or tradesman who needs battery boosting on the go.
Kit Comprises Following Components
- 1 x Suntech 130Watt 12Volt solar module
- 1 x Morningstar sunsaver 12Volt 10Amp regulator
- 2m of twin sheath cable
- 12m of Multi connect cable
- Miscellanous components
Suntech 130Watt 12Volt Solar Panel
Suntech’s STP130S-12Tb is designed and built to deliver highest efficiency and reliable power for on-grid residential and commercial systems worldwide. Relying on Suntech’s well-known stringent manufacturing standards and latest PV technology, the module provides the highest possible energy output per Watt with total module efficiency of 14%. Superior conversion rate and exceptional low-light performance enable it to deal with the most challenging conditions of military, utility, residential and commercial installations. The module is the perfect choice for those who demand outstanding performance and exceptional uniform appearance.
Suntech Design Features and Benefits
- High efficiency
- Nominal 12 V DC for standard output
- Outstanding low-light performance
- High transparent low-iron, tempered glass
- Unique techniques give the panel following features: esthetic
- appearance, with stands high wind-pressure and snow load, and easy installation
- Unique technology ensure that problems of water freezing and warping do not occur
- Design to meet unique demand of customer
Warranty
- Suntech 130Watt solar module provides 25 year warranty on power output
- Morningstar has 5 year warranty period
Suntech Technical Specifications
Electrical Characteristics |
| Cell | Silicon solar cells 156mm x 156mm |
| No of cells and connections | 36 (4 x 9) |
| Open-circuit voltage - Voc | 22.2 V |
| Optimum operating voltage -Vmp | 17.5 V |
| Short-circuit current - Isc | 8.04 A |
| Optimum operating current - Imp | 7.43 A |
| Maximum power at STC -Pmax | 130 Wp |
| Operating temperature | -40 ºC to +85ºC |
| Maximum system voltage | 1000 V DC |
| Mechanical Characteristics |
| Dimensions | 1482 x 676 x 35 mm |
| Weight | 12 kg |
| Temperature Coefficients |
| NOCT | 48 ºC ± 2 ºC |
Short circuit current temperature coefficient | 0.055 ± 0.01 % / K |
| Open circuit voltage temperature coefficient | -(78 ± 10) mV / K |
| Peak power temperature coefficient | -(0.4 ± 0.05) % / K |
| Power tolerance | ± 5 % |
| Output |
| Cable | LAPP(4.0mm²) |
| Lengths | 750mm(-) and 750mm(+) |
| Connection | MC Plug Type IV |
STC: Irradiance 100W/m², Module temperature 25ºC, AM=1.5
NOCT: Nominal Operating Cell Temperature
Morningstar Sunsaver 12Volt 10Amp Regulator
Morningstar's SunSaver is the world's leading small solar controller for both professional and consumer applications.
The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing:
- Automated production
- ISO 9002 quality programs
- Latest power electronic technologies
- Latest control and logic technologies
- High volume manufacturing
Morningstar Design Features
- 100% solid state
- Series design (not shunt)
- True 0 to 100% PWM duty cycle
- Set point accuracy to 35 mV
- Rated for 25% overloads
- Fully encapsulated in epoxy potting
- Marine rated terminals / anodized case
- Temperature compensation
- Sealed / Flooded battery select
- No need to derate
- Parallel for 40 amps or more
- Green charging / Red LVD indicators
Morningstar Technical Specifications
| Electrical Characteristics |
| Rated Solar Input | 10 A |
| Rated load | 10 A |
| 25 % current overload | 5 mins |
| Regulation voltage | Sealed battery | 14.1 V |
| Flooded battery | 14.4 V |
| Load disconnect | 11.5 V |
| LVD reconnect | 12.6 V |
| Temp compensation | -28 mV/ºC |
| Self consumption | 6 to 10 mA |
| Operating temp | -40 to +85 ºC |
| Mechanical Characteristics |
| Wire size 5.2 mm² | Epoxy encapsulated |
| Anodized aluminum case | Weight 0.23 kg |
What is PWM ?
Pulse Width Modulation "PWM" is the most effective means to achieve constant voltage battery charging by switching the solar system controller’s power devices. When in PWM regulation, the current from the solar array tapers according to the battery’s condition and recharging needs.
Downloads and Manuals
This product was added to our catalog on Monday 01 October, 2007.