EPS 24Volt 4Amp Desktop Charger with Extruded Heat Sink
Plug in and switch on charger at the mains supply and then turn the charger's Power switch on . The charger is ready for connecting to the charging socket or batteries. IMPORTANT! This type of charger must be switch on before connecting to batteries. When the charging process begins, the green LED illuminates. After reaching approximate 80 % charge, the green charging LED will cease to glow. But leave the batteries connected until ready for use. To check that battery is fully charged, turn off AC power or remove the charging connector for about 30 seconds then reconnect. The green LED should light momentarily then go out again. On this type of charger the battery may be left connected indefinitely as overcharging is impossible.
Applications
- Automotive
- Electric wheelchairs
- Scooters.
Features
- 2 stage charging cycle
- Suitable for up to 50 Ah in a standby or float application
- Compact and light weight
- Fully overload protected(auto recovery)
- Simple LED charging indicator
Warranty
- 2 Year Warranty of defects in material and workmanship.
Technical Specifications
| Electrical Characteristics | |
|---|---|
| Input | 90 - 260 VAC |
| Frequency | 38 - 63 Hz |
| Protection | Internal Primary |
| Isolation | Input-Output 3000 VAC |
| Input-case 2500 VAC | |
| Output-Case 500 VAC | |
| Topology | Switching DC power |
| Efficiency | 85 % |
| Boost charge voltage | 29.4 VDC |
| Float charge voltage | 27.6 VDC |
| Output charge current | 4 Amps |
Ripple and noise
| 150 mV |
| Line regulation | +/- 0.5 % over input range |
| Load regulation | +/- 1 % 0-100 % Load |
| Rise time | 500 ms |
Hold up time
| 20 ms at nominal output |
| Short circuit protection | Output shutdown |
| Over current protection | Primary power limit |
| Reverse polarity protection | Internal relay |
| Mechanical Characteristics | |
| Case dimensions | 105 L x 207 W x 60 H mm |
| Casing materials | Extruded anodized aluminium |
| Weight | 1.0 kg |
| Cooling | Convection cooled |
| Environmental | |
| Operating temperature range | -5 °C to 50 °C |
| Storage temperature | - 30 °C to +85 °C |
| Relative humidity | 10 % to 90 % |
| Altitude | 0 - 3000 m |
Quality and Safety
- Designed to IEC 950
- EMI-EMC - FCC Class B, CE,C-Tick
- Standard AS 3193
- Input connection - 3 core SAA cable IEC
Downloads and Manuals
Details
- Model: EPS2404
- Shipping Weight: 1kg
- Manufacturer:
EPS
