Fronius 3000W Transformerless Grid Connect Inverter IG 3.0 TL

Fronius 3000W Transformerless Grid Connect Inverter IG TL 3.0

The Fronius transformerless range of grid connected inverters deliver the ultimate combination in efficiency, ease of installation, and usability. The Fronius IG TL 3.0 3000W transformerless inverter offers industry-leading data monitoring from the built-in Status Manager, a maximum efficiency of 97.7 % and an IP55 indoor/outdoor rated enclosure.

Fronius IG TL 3.0 3000W transformerless inverter features:

• Night-time display for data access after daylight hours (night-time consumption less than 1w)
• Wide input voltage range allowing a diverse range of solar array combinations
• Accurate and efficient Maximum Power Point Tracking with the Module Manager
• Generic USB stick can be used for easy system/data monitoring as well as inverter updating
• String malfunction detection with built in signalling relay

Performance and easy installation:

Maximum power point tracking
The Module Manager allows the highest efficiency achievable by scaling inverter power handling capacity to suit the prevailing weather conditions and keep the inverter working at it's full efficiency potential.

Completely heat and dust-free ventilation concept.
The well-thought-out ventilation concept precludes overheating or contamination. The device body is hermetically sealed. Only the cooling fins for the electronics remain on the outside. The electronics are air-cooled. The temperature-controlled fan circulates outside air through the cooling fins as required. This ensures that the inside of the device remains significantly cooler and that there is absolutely no exchange between inside and outside air. 

Data display and access:

Night display. 
System information 24/7. The matrix display shows the most important information regardless of whether or not the inverter is in operation. This is made possible via the AC side power supply. For example, this enables you to access daily system data on the display even after sundown – including any status messages.

Update via USB. 
A generic-available USB stick that can be inserted into the inverter collects data during operation. System information can then be moved to a PC at any time and then analysed and archived using Fronius Solar access software. Time-consuming cabling is no longer required. Simply pull out the DATCOM slot, remove the USB stick and load the data to your PC.

String malfunction detection. 
The inverter continually compares the string currents of connected strings with each other. This enables the early detection of problems in the entire system (e.g. gnawing damage to cables from small animals, module failure, etc.). This can help to prevent an incremental loss of earnings.

Fronius IG TL 3.0 3000W Technical specifications: 

Fronius IG3.0 TL 3000W Downloads:

• Brochure