General Electric 200Watt 24Volt Photovoltaic Module

 

All modules are designed and manufactured to meet international safety and performance certifications. The modules feature heavy-duty anodized frames to give strength and convenient mounting access and weather-resistant junction boxes for easy and safe field interconnection.

 

Features

 

• 54 poly-crystalline cells connected in series
• Peak power of 200 watts at 26.3 volts
• Designed for optimum use in residential and commercial grid-tied applications
• Pre-wired junction box with MC Connectors

Benefits

 

• Output power tolerance of ± 5 %
• Robust, clear anodized aluminium frame with pre drilled holes for quick installation

Warranty

 

• 25-Year Power Output Warranty
• 5-Year material and workmanship warranty.

Technical Specifications

 

Electrical Characteristics
Peak power - Wp	200 W
Max power voltage - Vmp	26.3 V
Max power current - Imp	7.6 A
Open circuit voltage - Voc	32.9 V
Short circuit current - Isc	8.1 A
Max series fuse	15 A
Standard Operating Temperature
Short circuit temp coefficient	5.6 mA/ ºC
Open circuit voltage coefficient	-0.12 V/ ºC
Max power temp coefficient	-0.5 %/ ºC
Normal Operating Cell Temperature - NOCT	45 ºC
Mechanical Characteristics
Weight	17.7 kg
Dimensions	1485L x 981W x 35D mm

*IV parameters are rated at Standard Test Conditions (Irradiance of 1000 W/m2,AM 1.5G, cell temperature 25°C). As with all poly-crystalline PV Modules, duringthe stabilization process that occurs during the first few days in service, modulepower may decrease approximately 3% from typical maximum power due toa phenomenon known as Light Induced Degradation (LID). All measurements areguaranteed at the laminate leads. NOCT is measured at 800 W/m2, 20 deg. Cambient, and 1 m/s wind speed.

Quality and Safety

 

• UL 1703 certification IEC 61215 certification. .
• UL- 1703 and IEC 61215 version 1.0