Kyocera 130Watt 12Volt Multicrystal Photovoltaic Module

Kyocera's advanced cell processing technology and automated production facilities produce a highly efficient multicrystal photovoltaic modules.
The conversion efficiency of the Kyocera solar cell is over 16%. These cells are encapsulated between a tempered glass cover and a pottant with back sheet to provide efficient protection from the severest environmental conditions. The entire laminate is installed in an anodized aluminum frame to provide structural strength and ease of installation.

Applications

• Residential roof top systems
• Large commercial grid tie systems
• Water Pumping systems
• High Voltage stand alone systems

Warranty

• 1 year limited warranty on material and workmanship
• 20 years limited warranty on power output

Technical Specifications

Electrical Performance under Standard Test Conditions *STC
Maximum power - Pmax	130 W (+10% / -5%)
Maximum power voltage - Vmpp	17.6 V
Maximum power current - Impp	7.39 A
Open circuit voltage - Voc	21.7 V
Short circuit current - Isc	8.02 A
Max system voltage	600V
Electrical Performance at 800W/m², NOCT, AM 1.5
Maximum power - Pmax	92 W
Maximum power voltage - Vmpp	15.5 V
Maximum power current - Impp	5.94 A
Open circuit voltage - Voc	19.9 V
Short circuit current - Isc	6.47 A
Mechanical Characteristics
No of cells	36 Cells
Dimensions	1425L x 652W x 36D mm
Weight	12.2 kg
IP Code	IP 65
Reduction of efficiency under Low Irrandiance
Reduction	4.3 %

*STC: iradiance 1000W/m² AM1.5 spectrum, module temperature 25ºC
*NOCT: Nominal operating cell temperature 47ºC
*Reduction of efficiency from an irrandiance of 1000W/m² to 200W/m²(module temperature 25ºC)

Quality and Safety

• UL 1703certified
• ISO09001 and ISO 14001
• Thermal cycling test, thermal shock test, thermal / freezing and high humidity cycling test, electrical isolation test, hail impact test, mechanical, wind and twist loading test, salt mist test, light and water exposure test, field exposure test