Lorentz PS200 HR-07 Helical Rotor Submersible Water Pump
Please note: Lorentz has announced that LORENTZ solar panels must now be used with all Lorentz solar pumping systems.
- Price includes professional submersible cable splicing service - warranty covered for peace of mind
- Lift up to 30 m
- Maximum flow rate up to 1.2 m³/hour "Helical Rotor"
- Charger for 12/24 V batteries
- MPPT booster for solar-direct application included
- Operated either Solar direct or Battery
- Cost efficient pumping
- Maintenance free
- High reliability and life expectancy
LORENTZ was established in Hamburg, Germany and has been a quality designer and manufacture of Solar Pumps since 1993. Through the innovative electronic controlling, outstanding manufacturing quality and a simple design, Lorentz have managed to reduce the high cost of solar water pumping. Their submersible helical rotor pumps consist of only two parts, Lorentz's brushless motors are water filled and maintenance free, while the electronics are NOT inside the submerged motor but easily accessable on the surface.
Applications
- Drinking water supply
- Livestock watering
- Pond management
- Irrigation
- Windmill replacement
- Dams, creeks, rivers and tanks
Warranty
- 2 years manufacturer's warranty against defects in material and workmanship
Features
Controller PS200
- Controlling of the pump system and monitoring of the operating states
- Mounted at surface (no submerged electronic parts)
- Two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
- Automatic reset 20 minutes after well probe turns pump off
- Protected against reverse polarity, overload and high temperature
- Speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
- Solar operation: integrated MPPT (Maximum Power Point Tracking)
- Battery operation: low voltage disconnect and restart after battery has recovered
- Max. efficiency 88 % (motor + controller)
- Enclosure: IP 54 (sealed, weatherproof)
Motor ECDRIVE 600HR/200C
- Brushless DC motor
- no electronics inside motor
- Water filled
- IP68, Pressure balanced, ultimate submersion
- Dynamic slide bearings, material: carbon/ceramic
- Wetted material: stainless steel(AISI 316) POM, rubber, cable drinking water approved
Pump End "PE"
- High life expectancy
- Stainless steel none return valve
- Dry running protection
- Material stainless steel "ASI 316", rubber
HR- Helical Rotor Only
- Helical rotor pump (positive displacement pump)
- Two main parts only: stator and rotor,field serviceable
- Stator: geometry made of abrasion resistant rubber
- Rotor: stainless steel, hard chrome plated, abrasion resistant
- More resistant to damage by sand than other pump types
- Self-cleaning
Water Temperature Ranges
Please Choose Water Temperature Classes "X" from following before purchases HR pumps
X = 1 | For water temperature between 0 to 10 degrees celcious |
---|---|
X = 2 | For water temperature between 10 to 20 degrees celcious |
X = 3 | For water temperature between 20 to 30 degrees celcious |
X = 4 | For water temperature between 30 to 40 degrees celcious |
Performance
PS200 | HR-07 |
---|---|
Lift | 0 - 30 m |
Max flow rate | 1.2 m³/hour |
Packing | 850 x 160 x 150 mm |
Weight | 12.3 kg |
Solar Operation | Nominal Voltage 24-48V DC , Open Circuit Voltage Max 100V DC |
Solar Generator - Wp | 80 - 300 W |
Battery Operation | Nominal Voltage 24-48V DC |
Lorentz Summary Flow Chart
Total Dynamic Head (meters) | Watt/Volt | Fixed Array (m³ per day) | Tracking (m³ per day) |
---|---|---|---|
5 m (cable size 2.5mm²) | 120/24 | 6.0 | 8.7 |
10 m (cable size 2.5 mm²) | 120/24 | 5.2 | 7.5 |
15 m (cable size 2.5 mm²) | 120/24 | 5.0 | 7.2 |
20 m (cable size = 2.5mm²) | 120/24 | 3.8 | 5.5 |
180/36 | 7.0 | 9.1 | |
25 m (cable size = 2.5mm²) | 180/36 | 5.9 | 7.6 |
240/48 | 7.6 | 8.7 |
Notes on above flow chart:
- Calculated on an average of 6 full sun hours per day- KWh/m²
- 80W & 120W systems= 2 x 12Vsolar panel in series
- 180W systems = 3 x 12V solar panels in series
- 240W systems = 4 x 12V solar panels in series
System Sizing Table: Battery Operation
PS200 HR-07, 24V, Battery Operation | |||
---|---|---|---|
Vertical Lift (Meters) | Peak Flow Rate (Litres/min) | Power Required (W) | Wire Size (mm²) |
m | l/min | W | mm² |
5 | 7.5 | 37 | 2.5 |
10 | 7.5 | 42 | |
15 | 7.0 | 50 | |
20 | 6.5 | 60 | |
PS200 HR-07, 48 V, Battery Operation | |||
Vertical Lift (Meters) | Peak Flow Rate (Litres/min) | Power Required W | Wire Size (mm²) |
5 | 17.0 | 90 | 2.5 |
10 | 16.5 | 100 | |
15 | 15.8 | 115 | |
20 | 15.5 | 135 | |
30 | 14.2 | 160 | 4.0 |
40 | 13.5 | 190 |
System Sizing Table: Solar Direct Operation
PS200HR-07, 24V Nominal Voltage - 2 x 12V Standard Modules in Series | |||||
---|---|---|---|---|---|
Irradiation 4.0 KWh/m²/day - Titled Surface | |||||
Vertical Lift | Peak Flow Rate | Flow Rate for PV Array Power Peak-m³/day | Wire Size | ||
Metres | Litres/min | 80 Wp | 120 Wp | 150 Wp | mm² |
5 | 13.0 | 2.0 | 3.5 | 4.7 | 2.5 |
10 | 13.0 | 3.0 | 3.0 | 4.2 | |
15 | 12.0 | 3.9 | 2.8 | 3.9 | |
20 | 12.0 | 1.1 | 2.5 | 3.7 | |
Irradiation 6.0 KWh/m²/day - Titled Surface | |||||
Vertical Lift | Peak Flow Rate | Flow Rate for PV Array Power Peak-m³/day | Wire Size | ||
m | l/min | 80 Wp | 120 Wp | 150 Wp | mm² |
5 | 13.0 | 4.0 | 6.0 | 7.0 | 2.5 |
10 | 13.0 | 3.9 | 5.2 | 5.4 | |
15 | 12.0 | 3.5 | 5.0 | 5.2 | |
20 | 12.0 | 2.4 | 3.8 | 4.9 |
PS200HR-07, 36-48V Nominal Voltage - 2 x 12V Standard Modules in Series | |||||
---|---|---|---|---|---|
Irradiation 4.0 KWh/m²/day - Titled Surface | |||||
Vertical Lift | Peak Flow Rate | Flow Rate for PV Array Power Peak-m³/day | Wire Size | ||
m | l/min | 150 Wp | 200 Wp | 250 Wp | mm² |
5 | 19.5 | 4.7 | 7.0 | 8.5 | 2.5 |
10 | 19.0 | 4.2 | 6.0 | 7.5 | |
15 | 18.5 | 6.0 | 6.0 | 7.4 | |
20 | 18.0 | 5.5 | 7.0 | 7.0 | |
25 | 17.5 | 2.5 | 4.0 | 4.0 | |
Irradiation 6.0 KWh/m²/day - Titled Surface | |||||
Vertical Lift | Peak Flow Rate | Flow Rate for PV Array Power Peak-m³/day | Wire Size | ||
m | l/min | 150Wp | 200 Wp | 250 Wp | mm² |
5 | 19.5 | 8.5 | 9.5 | 10.5 | 2.5 |
10 | 19.0 | 8.0 | 9.0 | 10.0 | |
15 | 18.5 | 7.0 | 8.3 | 9.5 | |
20 | 18.0 | 6.0 | 7.5 | 9.0 | |
25 | 17.5 | 5.0 | 6.5 | 8.0 |
Quality and Safety
- Stainless steel material - AISI 316
- Enclosure IP 54 - sealed, weatherproof
Downloads and Manuals
Details
- Model: PS200
- Shipping Weight: 12.3kg
- Manufacturer:
Lorentz