GET A QUICK SOLAR QUOTE

Battery Backup Systemssolar components - archive

Lorentz PS200C-5-4 Centrifugal Submersible Water Pump for Battery Operation Only

 

Please note: Lorentz has announced that LORENTZ solar panels must now be used with all Lorentz solar pumping systems.

 

  • Price includes professional submersible cable splicing service - warranty covered for peace of mind
  • Lift up to 15 m
  • Maximum flow rate up to 5.0 m³/hour "Centrifugal Pump "
  • Battery Operation Only
  • Cost efficient pumping
  • Maintenance free
  • High reliability and life expectancy

LORENTZ was established in Hamburg, Germany and has been a quality designer and manufacture of Solar Pumps since 1993. Through the innovative electronic controlling, outstanding manufacturing quality and a simple design, Lorentz have managed to reduce the high cost of solar water pumping. Their submersible helical rotor pumps consist of only two parts, Lorentz's brushless motors are water filled and maintenance free, while the electronics are NOT inside the submerged motor but easily accessible on the surface.

 

Applications

 

  • Drinking water supply
  • Livestock watering
  • Pond management
  • Irrigation
  • Windmill replacement
  • Dams, creeks, rivers and tanks

Warranty

 

  • 2 years manufacturer's warranty against defects in material and workmanship

Features

 

Controller PS200
  • Controlling of the pump system and monitoring of the operating states
  • Mounted at surface (no submerged electronic parts)
  • Two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
  • Automatic reset 20 minutes after well probe turns pump off
  • Protected against reverse polarity, overload and high temperature
  • Speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
  • Solar operation: integrated MPPT (Maximum Power Point Tracking)
  • Battery operation: low voltage disconnect and restart after battery has recovered
  • Max. efficiency 88 % (motor + controller)
  • Enclosure: IP 54 (sealed, weatherproof)

Motor ECDRIVE 600HR/200C

 

  • Brushless DC motor
  • no electronics inside motor
  • Water filled
  • IP68, Pressure balanced, ultimate submersion
  • Dynamic slide bearings, material: carbon/ceramic
  • Wetted material: stainless steel(AISI 316) POM, rubber, cable drinking water approved

Pump End "PE"

 

  • High life expectancy
  • None return valve
  • Dry running protection
  • Material stainless steel "ASI 316", rubber

Performance

 

PS200 C5-4
Lift 0 - 15 m
Max flow rate 5.0 m³/hour
Packing 660 x 160 x 150 mm
Weight 10.5 kg
Solar Operation Battery Operation Only
Solar Generator - Wp  
Battery Operation Nominal Voltage 24-48V DC

Lorentz Summary Flow Chart

 

Total Dynamic Head
(meters)
Watts Fixed Array
(litres per day)
Tracking
(litres per day)
2 m
(cable size = 2.5mm²)
240 36000 52200
360 70000 105000
420 78000 117000
480 90000 135000
600 105000 157500
720 117000 175500
4 m
(cable size = 2.5mm²)
240 24000 34800
360 43000 64500
420 52000 78000
480 65000 975000
600 80000 120000
720 94000 141000

Notes on above flow chart:

 

  • 240W / 48V for low head 2 & 4m and low volumes only

Layout for Private Swimming Pools

 

Pool Size
Array Wp
Fixed
Pool Vol
Turnover
Array Wp
Tracking
Pool Vol
Turnover
40 360 82 % 360 126 %
50 420 96 % 360 100 %
60 480 90 % 360 84 %
80 600 88 % 420 90 %
90 600 78 % 480 92 %
100 720 83 % 480 82 %
110 --- --- 600 96 %

PS200 C-5-4, 24V to 48V System Sizing Table for Battery Operation

 

  20V 20V 20V
Lift Power Flow Rate Power Flow Rate Power Flow Rate
m W l/min W l/min W l/min
2.5 130 52 192 62 278 65
5 140 43 206 55 278 63
8 140 38 206 49 278 59
10 132 31 205 45 276 55
13 130 20 204 39 270 50
15 120 10 200 34 268 45
18 - - 190 25 238 35
Wire Cable Use minimum 4mm² / AWG # 10 cable max length 15 m

Quality and Safety

 

  • Stainless steel material - AISI 316
  • Enclosure IP 54 - sealed, weatherproof

Downloads and Manuals

 


Details

  • Model: PS200
  • Shipping Weight: 10.5kg
  • Manufacturer:
    Lorentz