Home: Solar & DC Pumps: Lorentz: Lorentz PS600 C-SJ5-8 Centrifugal Submersible Solar Water Pump

Lorentz PS600 C-SJ5-8 Centrifugal Submersible Solar Water Pump

Lorentz PS600 C-SJ5-8 Centrifugal Submersible Solar Water Pump

Please note: Lorentz has announced that LORENTZ solar panels must now be used with all Lorentz solar pumping systems.

  • Price includes professional submersible cable splicing service - warranty covered for peace of mind
  • Lift up to 0 - 25 m
  • Maximum flow rate up to 7.5 m/hour "Centrifugal "
  • Cost efficient pumping
  • Maintenance free
  • High reliability and life expectancy

LORENTZ was established in Hamburg, Germany and has been a quality designer and manufacture of Solar Pumps since 1993. Through the innovative electronic controlling, outstanding manufacturing quality and a simple design, Lorentz have managed to reduce the high cost of solar water pumping. Their submersible helical rotor pumps consist of only two parts, Lorentz's brushless motors are water filled and maintenance free, while the electronics are NOT inside the submerged motor but easily accessible on the surface.


  • Drinking water supply
  • Livestock watering
  • Pond management
  • Irrigation
  • Windmill replacement
  • Dams, creeks, rivers and tanks


  • 2 years manufacturer's warranty against defects in material and workmanship


Controller PS600

  • Controlling of the pump system and monitoring of the operating states
  • Mounted at surface (no submerged electronic parts)
  • Two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
  • Automatic reset 20 minutes after well probe turns pump off
  • Protected against reverse polarity, overload and high temperature
  • Speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
  • Solar operation: integrated MPPT (Maximum Power Point Tracking)
  • Battery operation: low voltage disconnect and restart after battery has recovered
  • Max. efficiency 92 % (motor + controller)

Motor ECDRIVE 600HR / C

  • Brushless DC motor
  • No electronics inside motor
  • Water filled
  • IP68, pressure balanced, unlimited submersion
  • Dynamic slide bearings, material: carbon/ ceramic
  • Wetted material: stainless steel (AISI316), POM, rubber, cable drinking water approved
Pump End - PE
  • High life expectancy
  • None-return valve
  • Dry running protection
  • Material: stainless steel (AISI 316), rubber

Technical Specifications

PS 600 C-SJ5-8
Lift 0 - 25 m
Maximum flow rate 7.5 m/hour
Solar operation Nominal voltage 48-72V DC, Open circuit voltage max 150V DC
Solar Generator - Wp 300 - 900 W
Battery operation Nominal voltage 48V DC
Motor + Pump end packing dimension 660 x 160 x 150 mm 12.0 kg
Controller PS600 450 x 250 x 240 mm 5.30 kg

Quality and Safety

  • Stainless steel material - AISI 316
  • Enclosure IP 54 - sealed, weatherproof

Downloads and Manual


Solar Store

For components pricing,
availability, purchase
or other enquiries, visit
our new components store
  • Model: PS600
  • Shipping Weight: 18kg
  • Manufacturer:

This product was added to our catalog on Monday 01 October, 2007.