Motech 30Amp MPPT Battery Charge Management System

PV4830 is a maximum 30A MPPT charge controller. It is designed to convert direct current produced by PV array into the batteries.

Due to the variability of sunlight conditions, Motech's PV4830 works under the maximum power point "MPP" principle. This means that the controller determines the solar generator's point of highest power every 10 milliseconds and regulates the voltage by means of a DC-DC converter. This way, users can get the greatest benefit from this MPPT charge controller.

The LCD of the PV4830 is easy to read and offers users a range of important information about their solar system, the state of the charge battery, load current and PV current. Because the PV4830 is a digital device, users can also setup all the configurations by using the front keys.

Design Features

• Accurate Maximum Power Point Tracking
• Charge 12 / 24 / 36 / 48V battery
• Intelligent battery management to extend battery’s life
• Limits power when used with an over-dimensioned PV module
• Unit Over temperature protection
• Unit Over voltage protection
• Unit Over current protection
• Battery Over temperature protection
• Battery Discharge Over current protection
• Battery Low Voltage protection
• All operating parameters are configurable via front keys
• Instant state of charge indication
• Diagnosis and communication via RS232/RS-485/USB interface
• Easy installation by mounting kit

Warranty

• 2 Years Warranty

Technical Specifications

Downloads and Manuals

• MPPT Charge Controller Brochure
• MPPT Charge Controller Manual