Motech 5100Watt Grid Connect Inverter
Flex- MPPTs is a technology that is unique to Motech PV inverters. With this technology, the user has the flexibility to configure the inverter to operate in either of these two following modes.
Mode1: Multiple panel string mode
Under this mode, each DC string has its own Maximum Power Point Tracker (MPPT) to optimize the efficiency. This mode is used if one single PV inverter monitors multiple PV strings in applications such as BIPV.
Mode2: Master / Slave mode
Master / slave mode is a proprietary Motech technology that allows PVMate 4600MS to operate at a higher efficiencywhen the isolation is low.
For PVMate 4600MS, a total of three strings are supported. Two or three strings could be connected in parallel by altering the jumper setting.
Not all the strings attached to the inverter have the same intensity during day time. When that situation occurs, PVMate would compensate and distribute the current across the strings that are connected in parallel, in order to achievethe best efficiency for these strings.
MOTECH PVMate 4600MS does not experience any derating attemperature up to 55.
Design Features
- Tracking of different irradiation angles
- Increases the energy yield via the reduction of mismatching and partial shading losses
- More flexibility, expandability
- One single inverter monitors multiple PV strings
- Grid tied PV inverter
- 1 to 3 independent MPP trackers
- PV System Monitor
- Process the data sent by the inverter
- Allows quick diagnostic when the systems is not operating properly
- Allows the user to adjust system parameters for optimal operation
Warranty
- 5 Years Warranty
- 25 Years life span
Technical Specifications
Input Electrical Data | |
---|---|
Model | PVMate 4600MS |
MPP voltage range | 100~450 V |
Max input voltage | 500 VDC |
Max input current | 30 A - (3x10A) |
Output Electrical Data | |
Grid voltage | 230 VAC (± 15%) |
Grid frequency | 60/50 Hz (± 1Hz) |
Nom AC power | 4600 W |
Max AC power | 5100 W |
Max AC current | 22 A |
Waveform | True sine |
Power factor | 0.99 |
THD | < 3 % |
DC current injection | < 0.5% |
Max efficiency (EU) | 96.3% (95.4%) |
Stand by power | <0.4 W |
Phase | Single |
General Data | |
Relative humidity | Max 95% |
Operating temperature | -20~55 ˚C (No de-rated) |
On/Off control | Automatic |
Enclosure | IP55 |
Cooling | Controlled fan |
Dimensions | 580 x 422 x 182 mm |
Weight | 23 kg |
Display | LED / LCD |
Communication | RS232C / RS485 |
Software | Solar Monitor |
Quality and Safety
- Safety standard EN 50178
- EMC immunity EN61000-6-2
- EMC emission EN61000-6-3
- Harmonic &Flicker EN61000-3-2A14&3-3
- Grid Control VDE 0126-1-1
Details
- Model: 4600MS
- Shipping Weight: 23kg
- Manufacturer:
Motech