Suntech Pluto - Solar Cell Efficiency Breakthrough

 

Suntech Power Holdings, the world's largest manufacturer of solar panels, has announced further details of its Pluto technology that has seen substantial improvements in solar cell conversion efficiencies.

While many breakthroughs in efficiencies have been achieved in recent months by other research organizations, such as researchers at the Fraunhofer Institute attaining a very impressive solar cell efficiency of 41.1%, none of these are anywhere near ready for prime time - the commercial solar panel market.

Suntech's Pluto technology has seen conversion efficiencies of approximately 19% on monocrystalline solar panels and 17% on polycrystalline solar panels outside of the lab and in large scale production. The performance has been verified by the Fraunhofer Institute for Solar Energy Systems ISE in Germany. Currently, high performing monocrystalline solar panels achieve around 18% and polycrystalline solar panels, 14%.

The patent-pending Suntech Pluto technology is based on PERL technology, developed locally at the University of NSW in Australia. Lower reflectivity has been achieved through unique texturing technology that allows increased sunlight to be absorbed even without direct solar radiation. Thinner metal lines on the top surface reduces shading loss. Suntech's Pluto technology can be applied to a variety of grades of silicon to suit differing applications and product types.

With continuing research and development, Suntech anticipates the Pluto technology will achieve up to 20% conversion efficiency on monocrystalline solar cells and 18% on polycrystalline solar cells within the next two years. Suntech currently has a 34MW Pluto solar cell production line fully operational and expects a total of 100MW installed Pluto capacity within the next two months.

 

 

NEW! - Energy Matters video news!   NEW! - Get Energy Matters News on your mobile!   NEW! - Energy Matters on Google+

 

Click here for news item reproduction guidelines

 

NEW! - Get the Energy Matters news feed widget for your site or blog!

 

---

---

---

---

Wind Power And Cavern Batteries

 

One of the major challenges of wind power is the sometimes fickle nature of the resource. When the wind isn't blowing, no power is produced. While the location of wind farms is usually carefully chosen, even these installations can be becalmed at times, leaving millions of dollars worth of wind turbines standing idle and requiring increased production of electricity from more environmentally damaging sources, such as coal or natural gas, to make up the shortfall.

Several companies are investigating air compression technology that could overcome this challenge. While the wind is blowing, some of the electricity generated by a wind farm will be used to compress air that will be stored in chambers below ground. In a situation where conditions are calm and power needs to be generated, the compressed air will be released, allowing the wind turbines to continue providing electricity. In effect, the cave becomes a battery of sorts.

While the idea of using compressed air in such a way may sound like pie-in-the-sky dreaming, it's already in use. At Huntdorf in Germany, a 290MW plant, powerful enough to run 290,000 homes, has been running in such a way for a quarter of a century. However in that case, the compressed air is generated by conventional power stations during off-peak.

One of the companies involved in compressed air wind power projects is Sirius Exploration, which has a 51% shareholding in Dakota Salts. Dakota has around 5,000 acres of exploration leases in the Williston Basin in North Dakota, the USA's windiest state. Sirius is working closely with Dakota to examine the prospects for using  salt caverns for "electricity storage".

The caverns will be about 16m in diameter and 160m tall; capable of storing around 100MW of electricity potential. Sirius and Dakota plan up to eight caverns during the first phase of the project and is expected to be on line in about five years. The company is also looking at establishing similar projects in China and Australia.

According to a Times Online article about wind farms and air compression, a compression plant should achieve an overall efficiency of about 75%, which requires capturing the heat generated when air is compressed. Without the harnessing of this waste heat, the efficiency can fall to 65% or less. 

Given the efficiency, even at the high end, utilising conventional power generation based on fossil fuels for air compression is still a rather wasteful affair; however for wind power it may be a perfect solution to ensuring that wind farm turbines achieve their full potential.

 

 

NEW! - Energy Matters video news!   NEW! - Get Energy Matters News on your mobile!   NEW! - Energy Matters on Google+

 

Click here for news item reproduction guidelines

 

NEW! - Get the Energy Matters news feed widget for your site or blog!

 

---

---

---

---

---

News for Friday 27 March, 2009

 

• Large Solar Farms Threatening The Environment - The Solution
  

---

View all news for Friday 27 March, 2009 on one page

---

---

---

Recent News

 

• Thursday 26 March, 2009
  


• Wednesday 25 March, 2009
  


• Tuesday 24 March, 2009
  


• Monday 23 March, 2009
  


• Friday 20 March, 2009
  

---

---

---

News archive