Orion 12 Volt DC to 24V DC 10Amp Converters
An ever-increasing amount of electric equipment is being used on vehicles and boats. Because most low-voltage equipment, such as navigation and radio equipment, mobile telephones or car hi-fi systems. Energy matters presents an Orion DC to DC converters which deliver a stable 24 Volt supply from a 9-18 Volt system. These products are also distinguished by high efficiency, together with absolute safety. An inferior supply can cause irreparable damage to your 24 Volt system, but the use of an Orion voltage converter prevents such problems.
Warranty
Technical Specifications
| Electrical Characteristics |
| Non isolated converters | Orion 12/24-10 |
| Input voltage | 9V to 18 V |
| Output | 24 V |
| Max .output current | 10 A |
| Fan assisted cooling - temperature controlled | no |
| Off load current | < 15 mA |
| Temp increase after 30 mins at full load | 30°C |
| Mechanical Characteristics |
| Casework | Anodized aluminum |
| Weight | 0.4 kg |
| Dimensions | Height | 49 mm |
Width | 88 mm |
| Depth | 126 mm |
| Common Characteristics |
| Output voltage stability | 2 % (Orion 12/24-10: + 0% / -5%) |
| Output voltage tolerance | 3 % |
| Output noise | < 50 mV rms |
| Efficiency | 92 % |
| Operating temperature | - 20 to + 30°C. Derate linearly to 0 A at 70°C |
| Humidity | Max 95% non condensing |
| Connections | 6.3 mm push-on flat blade connectors |
Quality and Safety
Protection: - Over current
- Overheating.
- Reverse polarity conn..
- Over voltage
| - Short circuit proof
- Reduction of output voltage
- Fuse and reverse connected diode across input
- Varistor (also protects against load dump)
|
Standards: - Emission
- Immunity
- Automotive Directive
| - EN50081-1
- EN 50082-1
- 95/45/EC
|
Downloads and Manuals
This product was added to our catalog on Monday 01 October, 2007.