PLM Remote Monitor

The PLM remote monitor is a device which allows remote user access to a PL series charge controller. It shows exactly the same information as the PL screen and the PLM button behaves in exactly the same way as the button on the PL. This means you can use the PLM for everything you would normally do at the PL itself, only in a more convenient or second location. You can access all the same information and adjust all the same settings as you can on the PL itself.

Features

There are two features in the PLM which are not found in the PL. These are LED Back-lighting, and an Alarm.

LED Back Lighting

The LCD display is back lit with yellow LED light. The display will turn off if you have not pushed the button for 16 minutes, just like the PL display. The Back-lighting will turn off at the same time.

Alarm

There is an alarm which is driven by the alarm (ALRM)function of the PL. This is a low voltage alarm. The alarm is capable of giving an audible alarm from the built in buzzer, or a visual alarm by flashing the back lighting, or both. The PLM is shipped with the audible alarm feature set OFF and the visual alarm feature set ON. If you want to change these settings, go to the DATA/SOLV screen. In this screen, there is an “A” which is normally used to show Amps in other screens. In this screen it shows “AUDIBLE”. There is also a “V” which normally shows voltage. Here it shows “VISUAL”. Use long pushes to switch between the four possibilities. You can have “A”, “V”, both, or neither.

Warranty

• 1 year manufacturers warranty

Technical Specifications