Home: Inverters: Selectronic: Selectronic SP Pro Series 48 Volt 6000 Watts Inverter Charger

Selectronic SP Pro Series 48 Volt 6000 Watts Inverter Charger


Selectronic SP Pro Series 48 Volt 60000 Watts Inverter Charger

 

The Selectronic SP PRO SERIES has been designed from the ground up with the world market in mind. Using our 25 years of experience in the harsh Australian market, we have developed a product which will suit many different markets including; Off Grid, On Grid with back up, Marine, Mobile and Industrial. Featuring advanced thermal power management and super high speed digital signal processing, new standards have been set for reliability, features, surge capability and power density.

 

The SP PRO series will act as a low voltage grid feeding inverter and will provide back-up power to the load if grid electricityhas failed. The unit can also be configured to operate as an Interactive Inverter Charger, with fast preset configurations for either mobile or remote power system use.

 

SP Pro Series Features

 

  • Ratings @ 40?C
  • Low distortion sine wave Interactive Inverter Charger with grid feed ability
  • Advanced thermal techniques provide excellent high temperature performance
  • 63 amp AC transfer switch with anti-chatter protection
  • Grid feeds with excess renewable
  • "Grid Lockout" setting can allow battery charging ôOff Peakö
  • Automatic changeover when grid fails without using a second inverter
  • World leading 300% surge capacity
  • True 100% charge capacity
  • Five stage battery charging with dual float points and adjustable temperature compensation
  • Simple LED display, with the AC LEDs directly powered from the monitored voltage
  • Redundant safety disconnect for pluggable operation
  • Plug and play or fully configurable via computer
  • Eighteen months of logged daily totals
  • Four months of sampled data at 30 minute sample rate
  • Adjustable 30/15/10/5/1 minute sample rate
  • Easy to use configuration/ monitoring software supplied standard
  • ôPartial state of chargeö control can minimise generator run time
  • Superbly quiet
  • All PCBs conformal coated with mil spec silicone
  • 4 x addressable digital inputs and 2 x analogue inputs
  • 2 x user definable shunt inputs
  • Low battery shutdown override in case of emergency
  • Discretionary load control
  • External solar regulator bypass function
  • 2 x serial ports with power for accessories
  • Variable speed fan with service alert
  • Lifetime monitored capacitors with service alert
  • Warranty, 5 yrs + 2 for SP Pro accredited installers

 

SP Pro Series Specifications

 

SP PRO SERIES SPECIFICATIONS SPMC 241ûAU SPMC 481ûAU SPMC 482ûAU
Nominal battery voltage 24 V 48 V 48 V
Continuous, output power @ 40?C 3500 W 4000 W 6000 W
Continuous, charge current @ 40?C 146 A 83 A 125 A
Continuous, output power @ 25?C 4000 W 4500 W 7000 W
Continuous, charge current @ 25?C 146 A 83 A 125 A
20 second load rating @ 40?C 10500 W 12000 W 18000 W
20 second output current @ 40?C 40 A 47 A 70 A
1 minute output power @ 40?C 7600 W 8700 W 13000 W
60 minute output power @ 40?C 4700 W 5300 W 8000 W
DC input voltage range 20 - 34 V 40 - 68 V 40 - 68 V
TRANSFER SWITCH
AC transfer current capacity 63 A
Max AC input source, (generator) W 15 kW
Max total output to Load, AC source + inverter 15 kW
AC transfer time no-break
Battery charger type 5 stage, power factor corrected with dual stage float
DC consumption idle 6 W
Standby (adjustable rate) 12 - 20 W
ON with no load 36 W 37 W 40 W
Peak efficiency û all modes 95% 95.5% 96%
10% load 90.5% 91% 91%
20% load 93% 94% 94%
50% load 94.5% 95% 95.5%
100% load 91% 92.5% 93%
Max Grid Feed capacity rated output
AC OUTPUT standalone
Setting accuracy 210 to 240 V+/- 1%
Regulation <2% droop @ 0-200% rated load (<5% 0-300%)
THD <3% @ 0-200% rated load
Frequency 50 or 60 Hz +/-0.005% standalone
AC SOURCE (input)
Nominal voltage 210 to 240 V~
Tolerance on nominal voltage programmable - 1% to 15%, + 1% to 10%
Nominal input frequency 50/60Hz
Tolerance on nominal frequency programmable +/- 1% to 10%
Generator can be started by battery SoC, DC voltage, battery load, unit temperature, time & remote control
Battery temperature sensor Yes
Mid point battery voltage sensing Yes
Inverter display 22 x LEDs with auto adjusting intensity.
Display indicates: charger status, remaining useable battery capacity, alarms, AC status.
AC status LEDs powered from AC voltage.
Generator control button. Output mode button. Alarm silence button.
Digital Inputs 4
Shunt Inputs 2 user definable: +/-75mV
Analogue Inputs 2 general purpose logged 0-60V
Relay Outputs 4: 60 V, 500 mA
Digital outputs 3: 60 V, 5 mA
Communication ports 2: RS232 with adjustable baud rate of up to 57600
Memory retention of settings & data
 permanent
SP LINK configuration and monitoring software Standard. Allows remote configuration of parameters and viewing of LED & digital displays
Dimensions (mounted) 345 W x 545 H x 215 D
Weight 34 kg 35 kg 40 kg
Circuit Breakers double pole 63A for both AC Source and AC Load
Standards EN61000-6-3 2007, AS3100 2002, AS4777 2005 (grid connect)
Protection IP43
Warranty 5 years + 2 years when installed by a Selectronic SP PRO accredited installer (conditions apply)
Through a policy of continual improvement, specifications may differ from those shown. All ratings are at 25?C and nominal battery voltage unless otherwise stated and are correct as at Feb 2009.


Downloads and Manuals

 


Apollo Energy



For pricing, availability
and online purchase
or further enquiries, visit
our components site,
Apollo Energy
  • Model: SPMC 482šAU
  • Shipping Weight: 40kg
  • Manufacturer:
    Selectronic

Product 18/18

Previous
Return to the Product List
Next

This product was added to our catalog on Tuesday 30 November, 1999.

solar energy specials

How much you can save by going solar

Solar power made simple

Why Energy Matters

Solar customer stories

Serving Canberra, Sydney, Melbourne, Adelaide, Perth, Brisbane, Hobart, most Australian cities and regional areas. Registered Electrical Contractor 
License Details: Victoria : 17899 | Queensland : 72514 | New South Wales: 241672C | South Australia: PGE 200959 | Tasmania : 1167162 | ACT : 20101309