Southwest Windpower Air-X Guyed Tower Kits (13.6m)

Southwest Wind power Guyed Tower Kits 13.6m For AirX Wind Turbines

Guyed towers are the standard for simple and durable tower installations. These towers are tilt-up for easy erection. All parts are threaded, so no welding is required.

Features

• 13.6 m Guyed Tower kits
• Installs in a few hours
• No winching no sweat

Piped Pieces Needed

• 7.3 Metres length of pipe for tower (wall thickness selected for local conditions)
  
• 6.4 Metres length of pipe for tower (wall thickness selected for local conditions)
• 1.8 M length of tubing for tower base (.065 in. wall thickness)
• 6.4 M length of tubing for gin pole (.065 in. wall thickness)

Pipe Requirements

• Tower Kits use 47.5 mm (1-7/8 inch) Steel Tubing

Maximum Wind Speed

Items Not Included In This Kit

• Anchors (The type of anchors used will depend on the ground makeup at your tower site. This is explained further in the “Anchors” section of the manual.)
• Tubing for Tower and Gin Pole
• Ground Rod and Clamp
• Lightning Arrestor *
• Junction Box and Adapter *
• Flex Conduit and Fitting *
• Electrical Wire
• Wire Connectors (preferably copper split bolts)
• Pipe Insulation (to prevent wire “rattle” inside pole) *
• Electrical tape
  (* optional items - these are explained in detail in their relevant assembly sections of the manual)