SunLock Solar Panel Frame Mounting System - Rail Joiner (Pair)

  

The SunLock Rail Joiner is used to securely add lengths of SunLock rail to framing to extend or customise the finished frame to almost any combination imaginable. The SunLock Rail Joiner incorporates a secure insert clamp to prevent the rails from separating when being lifted into position or when they are being fixed to the roof. This delivers a seamless and secure install process with no 'kinks' in long array rows.

  

Like all SunLock framing clamps, a 6mm allen key is the only tool needed to secure the clamp. Sold as a pair.

  

Here's three of many good reasons to choose the SunLock solar panel mounting system!

 

Australian Made - SunLock is an Australian designed and manufactured solar panel mounting system. Utilising custom designed and built aluminium extrusions and components, the SunLock system’s design greatly streamlines construction and improves frame strength in comparison to other systems.

 

Adaptability - SunLock’s significantly higher strength-to-weight ratio allows more efficient use and greater spans. Its highly versatile design offers adjustability and expandability to suit any job size.

 

Durability - Made entirely from aluminium and stainless steel, SunLock framing is suitable for long-term installation in all environments. SunLock framing is also backed by a 10 year warranty and is fully compliant with the Australian/New Zealand standard on wind actions AS/NZS 1170.2.2002, making it suitable for a wide variety of building types and climatic zones.

 

 

SunLock features

 

• Aluminium 6106-T6 extrusion
• Building height up to 200m
• Roof slope range 10º to 65 º
• Optional tilt legs for greater solar efficiency
• Corrosion resistant, providing low maintenance and extended product life cycle.
• Can be used to secure a vast array of solar panel thicknesses
• Easy to install with adjustable locking devices
• Installation site: residential, commercial, remote area and marine applications.
• Complies with Australian/New Zealand Standard on wind actions, AS/NZS 1170.2.2011

 

SunLock mounting system instructional video

 

 

Technical specifications

 

Materials	Extruded Aluminium 6106T6
Tensile strength	Ultimate: 235 MPa / Yield: 210MPa
Installation site	Australia/NZ
Roof types	Steel, tile and slate
Modules thickness	35 to 50mm
Module arrangement	Portrait or landscape
Roof slope	3 to 65 degrees
Building height	Up to 200m
Mounting structure	Timber or steel substructure

 

SunLock downloads and further information

 

• SunLock manual
• SunLock web site