Victron Multiplus 5000watt 48volt 70amp Inverter Charger
Energy matters offers a complete range of Victron Energy
systems, designed to meet a diversity of requirements. From small craft to
large sailing yachts, mobile homes, utility vehicles or industrial
applications, our systems offer the ideal solution to your specific power
needs.
With over 30 years’ experience, Victron Energy enjoys
an unrivalled reputation for technical innovation, reliability and quality,
and is world leader in the supply of self-supporting electric power. Victron
products have been designed to meet the most demanding situations faced by a
diversity of craft, recreational and commercial alike, whilst Victron also
cater for many other industrial and commercial applications.
However far you travel, a reliable power source is an
essential requirement for providing optimum onboard comfort. This necessity
becomes even greater in remote places where the power supply is less
dependable. So now you can enjoy a hot shower or a cold drink, whenever and
wherever you want, without worrying about where your power is coming from.
Multiplus 48/5000/70 inverter charger Power Control
Shore power is often available at a limited amperage. The
optional remote panel (B) allows the user to inform the Multiplus 48/5000/70 inverter charger
of the
shore power limit in harbor, the Multiplus 48/5000/70 inverter charger will then control the charging
output to work within the limits of the shore cord. As more power is used
for onboard circuits the charger output automatically reduces to avoid
overload
Multiplus 48/5000/70 inverter charger Power Assist
With a Multiplus 48/5000/70 inverter charger, power management goes one step further.
In the event that the onboard load exceeds the available shore power, the
inverter function works in parallel with the shore connection to boost the
total energy available and avoid overload. This works just the same with a
generator.
Victron Multiplus - the ultimate battery charger
As a battery charger, the Multiplus 48/5000/70 inverter charger
offers the ultimate
in programmable sophistication. The four stage ‘adaptive’ charge
characteristic, unique to Victron Energy, ensures that each and every charge
cycle delivers exactly what the battery needs. Using ‘VE Configure’ set
up software it is possible to modify charge characteristic and parameters to
suit any type or size of battery.
Victron Multiplus adaptive 4-stage charging
The Multiplus 48/5000/70 inverter charger identifies how much energy remains in the battery at the
beginning of each cycle. The charge parameters are then adapted to deliver
exactly what is needed no more and no less. This process ensures fast,
complete charging without causing damage through overcharging. Properly
charged batteries will last.
Temperature Sensor
The temperature sensor supplied with the product may be
used for temperature compensated charging. The sensor is insulated and must
be mounted on the batteries minus pole. Default output voltages for Float
and Absorption are at 25°C. In adjust mode temperature compensation is
disabled.
Applications
- Lighting
- Communication & navigation
- Coffee Maker
- TV / DVD
- Laptop
|
- Electrical power tools
- Refrigerator
- Microwave
- Hairdryer
- Small chargers (mobile phone, electric shaver)
|
Warranty
Multiplus 48/5000/70 inverter charger specifications
| PowerControl |
Yes |
| PowerAssist |
Yes |
| Transfer switch |
50 |
| Parallel and 3-phase operation |
Yest |
|
Inverter |
| Input voltage range (V DC) |
38 – 66 V |
| Output Output voltage: |
230 VAC +/- 2% Frequency: 50 Hz +/- 0.1% (1) |
| Cont. output power at 25C (VA) (3) |
5000 |
| Cont. output power at 25C (W) |
4500 |
| Cont. output power at 40C (W) |
4000 |
| Peak power (W) |
10.000 |
| Maximum efficiency (%) |
94 |
| Zero-load power (W) |
25 |
| Zero load power in AES mode (W) |
20 |
| Zero load power in Search mode (W) |
5 |
|
Charger |
| AC Input |
Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Power factor: 1 |
| Charge voltage 'absorption' (V DC) |
57.6 |
| Charge voltage 'float' (V DC) |
55.2 |
| Storage mode (V DC) |
52.8 |
| Charge current house battery (A) (4) |
70 |
| Battery temperature sensor |
yes |
|
General |
| Auxiliary output (A) (5) |
Yes (25A) |
| Programmable relay or relay driver (6) |
relay |
| Protection (2) |
a - g |
| VE.Bus communication port |
For parallel and three phase operation, remote monitoring and system integration |
| Common Characteristics |
Operating temp. range: -20 to +50C (fan assisted cooling) Humidity (non condensing) : max 95% |
|
Enclosure |
| Common Characteristics |
Material & Colour: aluminium (blue RAL 5012) Protection category: IP 21 |
| Battery-connection |
Four M8 bolts (2 plus and 2 minus connections) |
| 230 V AC-connection |
Screw terminals 13 mm2 (6 AWG) |
| Weight (kg) |
30 |
| Dimensions (hxwxd in mm) |
444x328x240 |
|
Standards |
| Safety |
EN 60335-1, EN 60335-2-29 |
| Emission, Immunity |
EN55014-1, EN 55014-2, EN 61000-3-3 |
| Automotive Directive |
2004/104/EC |
1) Can be adjusted to 60 HZ; 120 V 60 Hz on request
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 230 VAC on inverter output
g) input voltage ripple too high |
3) Non linear load, crest factor 3:1
4) At 25 °C ambient
5) Switches off when no external AC source available
Available on 3kVA models with 50A transfer switch only
6) Programmable relay that can a. o. be set for general alarm,
DC undervoltage or genset start/stop function
AC rating: 230V/4A
DC rating: 4A up to 35VDC, 1A up to 60VDC
7) Open collector output 66V 40mA |
Victron Multiplus 48/5000/70 inverter charger downloads
This product was added to our catalog on Friday 18 June, 2010.
