Water Level Power Switch for Pumps

The Water Level Power Switch allows the automatic control of water pumps and handles low water protection or tank full situations..

When your water tank is full, the float switch rises and changes the electrical signal, therefore shutting off the pump controller. As the water level in the tank falls, the float switch will also move and will eventually allow the pump controller to turn back on and re-fill the tank

Design Benefits

The float switch is configured to be normally closed, which means the pump will run unless the switch is activated (e.g. the switch is activated by a full water level in the tank). In this case, the 2 wires used are the black and Blue wires.

In some cases, the opposite is required. In this case, the 2 wires used are the black and Brown wires.

Kit includes a double-acting float valve fitted with 8 m of wires

Warranty

• 6 months warranty

Technical Specifications