Camp Power Basic Complete 80 watt Solar Power System
Instant camping freedom! An effective, portable and economical power system for use with 12 volt loads. This kit is capable of producing and storing 20Ah of energy per day*. This means being able to run (for example) a couple of 10w camping lights for 3 hours each night and an efficient 12v camping fridge!
Basic Camping Solar Power Kit Includes:
- 1 x 80w Suntech folding panel (2 x 40w panels) and heavy duty canvas bag to protect panels during transport
- 10m of cable to allow placement of the panel in a sunny location
- 1 x Morningstar Sunsaver 12 volt 6 amp solar regulator
- 1 x Relay Gel 12 volt 86 Ah VRLA Gel Deep Cycle Battery (powered by Sonnenschein«) mounted in carry box
- Resettable circuit protection and wiring loom assembled to Australian Safety Standards.
- 2 x cigarette lighter sockets for connection to standard campsite appliances and 12v devices/chargers.
No complicated wiring required; this camping solar power kit is ready to plug and play and will begin charging the battery the second the panel faces the sun!
If the weather turns cloudy, the battery will store enough energy to keep your campsite comfortable for 48 hours (given the load described above)
*Daily energy production depends on weather conditions and time of year: the quantity of energy produced each day is based on average Australian climate data.
Warranty Information
- The Suntech 80w folding kit has a 25-year performance warranty
- The Morningstar Sunsaver 12v 6A regulator has a 5 year warranty
- The Relay Gel 86Ah battery has a 1 year warranty
- A materials and workmanship warranty of 1 year for hardware assembly
Suntech Solar Module Technical Specifications
Electrical Characteristics | ||
Maximum power at STC - Pmax | 80 W | |
Open circuit voltage - Voc | 21.6 V | |
Optimum operating voltage - Vmp | 17.2 V | |
Short circuit current - Isc | 5.24 A | |
Optimum operating current - Imp | 4.64 A | |
Operating temperature | - 40C to + 85C | |
Mechanical Characteristics | ||
Dimensions | Operating | 1074 x 665 x 30 mm |
Storage | 537 x 665 x 65 mm | |
Weight | 9.0 kg |
Morningstar Sunsaver 6A Regulator Features
- 100% solid state
- Series design (not shunt)
- True 0 to 100% PWM duty cycle
- Set point accuracy to 35 mV
- Rated for 25% overloads
- Fully encapsulated in epoxy potting
- Marine rated terminals / anodised case
- Temperature compensation
- Sealed / Flooded battery select
- No need to derate
- Parallel for 40 amps or more
- Green charging / Red LVD indicators
Morningstar Sunsaver 6A Regulator Technical Specifications
Electrical Characteristics | ||
---|---|---|
Rated Solar Input | 6.5 A | |
Rated load | 6.0 A | |
25 % current overload | 5 mins | |
Regulation voltage | Sealed battery | 14.1 V |
Flooded battery | 14.4 V | |
Temp compensation | -28 mV/C | |
Self consumption | 6 to 10 mA | |
Operating temp | -40 to +85C | |
Mechanical Characteristics | ||
Wire size 5.2 mm? | Epoxy encapsulated | |
Anodised aluminium case | Weight 0.23 kg |
Relay Gel 12 volt 86 Ah VRLA Gel Deep Cycle Battery in carry box features
- Weight 28Kg
- Valve regulated Lead Acid (VRLA) gel battery.
- Gel electrolyte design utilizing Sonnenschein« technology.
- Reinforced polypropylene case and cover - reducing battery wall deflection.
- Horizontal or vertical operation.
- Optional flame retardant polypropylene case and cover compliant with UL94 V-0.
- Super-sensitive helium leak detection system insures the quality of the seals.
- Thick high-tin, low-calcium, silver positive plate design.
- Nominal float voltage 13.5 to 13.8 volts at 25C.
- Recyclable to world standards.
- Integrated removable carrying strap handles (optional)
- Original dryfit gel battery - superior and more economically efficient compared to other gel batteries
Details
- Model: campbasic
- Shipping Weight: 38kg