SunLock Solar Panel Frame Mounting System - Base Rail 2600mm
SunLock Base Rails (2600 mm) are the main supporting structure used in the SunLock framing system. Used in a parallel pair, the rails allow each solar panel to be clamped at four contact points for a highly secure fit. Additionally, the rail also supports roof fixings at any point along the frames length, allowing the installer to fit the framing to bearers at any interval without requiring time consuming adjustment.
The SunLock Base Rail (2600 mm) is sold as an individual item (not as a pair). This allows flexibility in installs where system size, separate rows, or unusual panel dimensions require rails to be cut and joined using the SunLock mounting rail joiner to customise the total rail length.
Here's three of many good reasons to choose the SunLock solar panel mounting system!
Australian Made - SunLock is an Australian designed and manufactured solar panel mounting system. Utilising custom designed and built aluminium extrusions and components, the SunLock systems design greatly streamlines construction and improves frame strength in comparison to other systems.
Adaptability - SunLocks significantly higher strength-to-weight ratio allows more efficient use and greater spans. Its highly versatile design offers adjustability and expandability to suit any job size.
Durability - Made entirely from aluminium and stainless steel, SunLock framing is suitable for long-term installation in all environments. SunLock framing is also backed by a 10 year warranty and is fully compliant with the Australian/New Zealand standard on wind actions AS/NZS 1170.2.2002 , making it suitable for a wide variety of building types and climatic zones.
SunLock features
- Aluminium 6106-T6 extrusion
- Building height up to 200m
- Roof slope range 10º to 65 º
- Optional tilt legs for greater solar efficiency
- Corrosion resistant, providing low maintenance and extended product life cycle.
- Can be used to secure a vast array of solar panel thicknesses
- Easy to install with adjustable locking devices
- Installation site: residential, commercial, remote area and marine applications.
- Complies with Australian/New Zealand Standard on wind actions, AS/NZS 1170.2.2011
SunLock mounting system instructional video
Technical specifications
Materials | Extruded Aluminium 6106T6 |
Tensile strength | Ultimate: 235 MPa / Yield: 210MPa |
Installation site | Australia/NZ |
Roof types | Steel, tile and slate |
Modules thickness | 35 to 50mm |
Module arrangement | Portrait or landscape |
Roof slope | 3 to 65 degrees |
Building height | Up to 200m |
Mounting structure | Timber or steel substructure |
SunLock downloads and further information
Details
- Model: sl-rail-2600
- Shipping Weight: 3.4kg
- Manufacturer:
SunLock