GET A QUICK SOLAR QUOTE

Battery Backup Systemssolar components - archive

SunPower 225Watts Grid Connect Solar Module

 

EXCEPTIONAL EFFICIENCY AND PERFORMANCE

 

SunPower designs, manufactures and delivers high-performance solar electric technology worldwide. SunPower high-efficiency solar cells generate up to 50 percent more power than conventional solar cells. High-performance solar panels, roof tiles and trackers deliver significantly more energy than competing systems.

 

The SunPower 225 Solar Panel provides today’s highest efficiency and performance. Utilizing 72 next generation SunPower all back-contact solar cells and an optimized panel design, the SunPower 225 elegantly delivers an unprecedented total panel conversion efficiency of 18.1%. The panel’s reduced voltage-temperature coefficient and exceptional low-light performance attributes provide outstanding energy delivery per peak power watt.

 

Benefits

 

Highest Efficiency
Panel efficiency of 18.5% is higher than any commercially available panel of similar size.

 

More Power
SunPower 230 delivers up to 50% more power per unit area than conventional solar panels and 100% more than thin film solar panels.

 

Reduced Installation Cost
More power per panel means fewer panels per install. This saves both time and money.

 

Reliable and Robust Design
Proven materials, tempered front glass, and a sturdy anodized frame allow panel to operate reliably in multiple mounting configurations.

Warranty

 

  • 10 year limited product warranty
  • 25 year limited power warranty

Technical Specifications

 

Electrical Characteristics
Peak Power -Pmax 225 W
Rated Voltage -Vmp 41.0 V
Rated Current - Imp 5.49 A
Open Circuit Voltage - Voc 48.5 V
Short Circuit Current - Isc 5.87 A
Maximum System Voltage - IEC 1000 V
Temperature Coefficients Power –0.38% /°C
Voltage - Voc –132.5 mV/°C
Current - Isc 3.5 mA/°C
Peak Power -Pmax ±3%
Series Fuse Rating 20 A
Peak Power per Unit Area 181 W/m²
Mechanical Characteristics
Solar Cells 72 SunPower all back-contact monocrystalline
Front Glass 3.2mm (1/8 in) tempered
Junction Box IP-65 rated with 3 bypass diodes
Output Cables 900 mm length / Multi-Contact connectors
Frame Anodized aluminum alloy type 6063
Dimensions 1559 x 798 x 46 mm
Weight 15 kg,
Tested Operating Conditions
Temperature –40° C to +85° C
Max load 240 kg/m2 (2400 Pascals) front and back
Impact Resistance Hail – 25mm at 23 m/s
Measured at Standard Test Conditions (STC): irradiance of 1000/m2, air mass 1.5 g, and cell temperature 25° C

Quality and Safety

 

  • IEC 61215 , Safety tested IEC 61730

Downloads and Manuals

 


Details

  • Model: SPR-225
  • Shipping Weight: 15kg
  • Manufacturer:
    SunPower Corporation