Suntech 10Watt 12Volt Mono-Crystalline Solar Panel
The STP010-12 is a 10 watt, 12 volt solar panel, and will provide enough power to trickle charge a 12V vehicle or deep cycle battery. Helps run pumps, lights, fans, and small appliances such as stereos, televisions and VCR's in caravans, boats or cabins.
The STA010-12 modules are composed of 36 mono-crystalline silicon solar cells of similar performance, interconnected in series to obtain the 12 volt output.
A heavy-duty anodized aluminium frame provides strength and convenient mounting access. For each 18 cells series strings, one bypass diode is installed. Cells are laminated between high transmissivity, low-iron, 3mm tempered glass and sheet of tedlar-polyester-tedlar 'TPT' material by two sheets of ethylene Vinyl acetate 'EVA'. This protects against moisture penetrating into the module.
Features
- 36 high-efficiency Suntech Power Silicon Solar Cells
- More power in peak hours through Suntech Power Cells
- Optimized module performance with Nominal Voltage 12 V DC
- Bypass diodes to avoid hot-spot effect
- Cells are embedded in a sheet of TPT and EVA
- 3.2 mm high transmissive low-iron, tempered glass
- Unique esthetic appearance of cells
- Attractive, stable,heavy duty anodized aluminum frames with convenient
- mounting-access, for high wind-pressure and snow-load
- The backside frames are equipped with drainage holes. So we eliminate the
- risk that rain or snow water may accumulate in the frame lumen and freeze or even bend the frame in cold season
- Pre-cabled with fast-connecting systems
- Customer-desired packing
Warranty
- 25 years Limited Power Warranty
Technical Specifications
Electrical Characteristics | |
---|---|
Cells | Mono crystal silicon |
No. of Cells & Connections | 36 Cells in Series |
Open Circuit Voltage -Voc | 21.6 V |
Maximum Power Voltage - Vmp | 17.2 V |
Short Circuit Current - Isc | 0.64 A |
Maximum Power Current - Imp | 0.58 A |
Mechanical Characteristics | |
Dimensions | 310 x 368 x 18 mm |
Weight | 1.5 kg |
Quality and Safety
- Certifications: IEC 61215, TUV class II, CE
- Manufactured in ISO 9001:2000 standard
Details
- Model: STP010-12
- Shipping Weight: 1.5kg
- Manufacturer:
Suntech Power