SunLock Solar Panel Frame Mounting System 1kW Steel Roof Kit

The SunLock 1kW steel roof framing kit includes everything an installer needs to get a basic solar install quickly and securely fixed to the roof. If the job requires 2kW of solar panels to be installed, a second SunLock 1kW steel roof framing kit can be used with a pair of SunLock Rail Joiners to seamlessly extend the frame capacity. If the job requires the addition of a small number of additional panels, additional rails can be bought and cut in half to provide the extra material length.

The SunLock 1kW steel roof framing kit is designed to accommodate 6 x 'typical' grid connect solar panels each measuring no more than 830mm wide and between 35 and 50mm deep. The panel length is not as important - refer to brochure for further detail on panel dimension.

The kit includes:

• 12 x SunLock L-Feet (Steel roof interface) including general purpose roofing screws
• 4 x SunLock Base Rail 2600 mm
• 2 x SunLock Rail Joiners
• 4 x SunLock Universal Endclamps
• 10 x SunLock Midclamp50 or SunLock Midclamp60 (depending of the type of solar panel used)

Here's three of many good reasons to choose the SunLock solar panel mounting system!

Australian Made - SunLock is an Australian designed and manufactured solar panel mounting system. Utilising custom designed and built aluminium extrusions and components, the SunLock system’s design greatly streamlines construction and improves frame strength in comparison to other systems.

Adaptability - SunLock’s significantly higher strength-to-weight ratio allows more efficient use and greater spans. Its highly versatile design offers adjustability and expandability to suit any job size.

Durability - Made entirely from aluminium and stainless steel, SunLock framing is suitable for long-term installation in all environments. SunLock framing is also backed by a 10 year warranty and is fully compliant with the Australian/New Zealand standard on wind actions AS/NZS1170.2, making it suitable for a wide variety of building types and climatic zones.

SunLock features

• Aluminium 6106T6 extrusion made from 100% recycled material.
• Building height up to 200m
• Roof slope range 10º to 65 º
• Static load capacity from 20 to 1800N
• Optional tilt legs for greater solar efficiency
• Corrosion resistant, providing low maintenance and extended product life cycle.
• Can be used to secure a vast array of solar panel thicknesses
• Easy to install with adjustable locking devices
• Installation site: residential, commercial, remote area and marine applications.
• Complies with Australian/New Zealand Standard on wind actions, AS/NZS 1172.2:2002

SunLock mounting system instructional video

Technical specifications

Ultimate Wind Load Capacity

Structural design analysis confirms the following ultimate wind loads supported by SunLock framing.

Maximum Serviceable Wind Loading

The table below describes the maximum serviceable wind loading that SunLock rails can support in reference to a maximum deflection of span/200 (Span/200 is considered the maximum acceptable deflection limit for SunLock rails supporting solar panels).

SunLock downloads

• Brochure