SunLock Solar Panel Mounting Mid Clamp 50

SunLock Solar Panel Frame Mounting System - Mid Clamp 50

The SunLock Midclamp50 is used to fix panels with a frame height of 32 to 44mm. This clamp is used between panels mounted next to each other and creates a small (18mm) gap between panels to improve ventilation (beneficial for cooling), and to reduce wind loading. Like all SunLock framing clamps, a 6mm allen key is the only tool needed to secure the clamp. Sold as an individual item.

Here's three of many good reasons to choose the SunLock solar panel mounting system!

Australian Made - SunLock is an Australian designed and manufactured solar panel mounting system. Utilising custom designed and built aluminium extrusions and components, the SunLock system’s design greatly streamlines construction and improves frame strength in comparison to other systems.

Adaptability - SunLock’s significantly higher strength-to-weight ratio allows more efficient use and greater spans. Its highly versatile design offers adjustability and expandability to suit any job size.

Durability - Made entirely from aluminium and stainless steel, SunLock framing is suitable for long-term installation in all environments. SunLock framing is also backed by a 10 year warranty and is fully compliant with the Australian/New Zealand standard on wind actions AS/NZS 1170.2.2002, making it suitable for a wide variety of building types and climatic zones.

SunLock features

• Aluminium 6106T6 extrusion
• Building height up to 200m
• Roof slope range 10º to 65 º
• Static load capacity from 20 to 1800N
• Optional tilt legs for greater solar efficiency
• Corrosion resistant, providing low maintenance and extended product life cycle.
• Can be used to secure a vast array of solar panel thicknesses
• Easy to install with adjustable locking devices
• Installation site: residential, commercial, remote area and marine applications.
• Complies with Australian/New Zealand Standard on wind actions, AS/NZS 1170.2.2002

SunLock mounting system instructional video

Technical specifications

Ultimate Wind Load Capacity

Structural design analysis confirms the following ultimate wind loads supported by SunLock framing.

Maximum Serviceable Wind Loading

The table below describes the maximum serviceable wind loading that SunLock rails can support in reference to a maximum deflection of span/200 (Span/200 is considered the maximum acceptable deflection limit for SunLock rails supporting solar panels).

SunLock downloads

• Brochure
• SunLock manual