GET A QUICK SOLAR QUOTE

Battery Backup Systemssolar components - archive

BP 165Watt 24Volt Polycrystalline Solar Module

 

The BP 3165 is an advanced 165 watt module utilizing anti-reflective coatings on both its multicrystalline cells and glass. The module also features IntegraBusTM technology which is a printed circuit board with integrated diodes that has been designed to ensure reliability whilst conducting higher currents. The BP 3165 has been designed for grid connect solar applications, such as large commercial roofs, residential systems and photovoltaic (PV) power plants, as well as remote off-grid applications such as telecommunications, water pumping and residential systems. This 72-cell module offers superior value – greater performance from a white polyester back-sheet and innovative, high-efficiency cells.

 

Warranty

 

  • Minimum power output of 93% for the first 12 years and 85% through 25 years
  • 5-year limited warranty on materials and workmanship

 

Technical Specifications

 

Electrical Characteristics
Rated power - Pmax 165 W
Power tolerance ± 3 %  
Warranted minimum power 160 W
Voltage at Pmax - Vmp 35.2 V
Current at Pmax - Imp 4.7 A
Short circuit current - Isc 5.1 A
Open circuit voltage - Voc 44.2 V
Maximum series fuse rating 15 A
Maximum system voltage 1000 V
Mechanical Characteristics
Solar cells 72 cells(125 x 125mm) configured geometrically for a 12x6 matrix connected in series.
Construction Front: high transmission 3.2mm tempered anti-reflective coated glass
Rear: white polyester, encapsulant: EVA
Frame Clear anodised Aluminium alloy type 6063T6, Silver
Dimensions 1593 x 790 x 50 mm
Weight 15.4 kg
Temperature Coefficient
Temperature coefficient of Isc (0.065 ± 0.015)% /°C
Temperature coefficient of Voc -(160 ± 20)mV /°C
Temperature coefficient of Pmax -(0.5 ± 0.05)% / °C
Temperature cycling range -40°C to +85°C
Damp heat test 85°C and 85% relative humidity
Front and rear static load test (eg: wind) 2400Pa*(equivalent to 245kg/m² load distributed)
Front load test (eg: snow) 5400Pa* (equivalent to 550kg/m² load distributed)
Hail impact test 25mm hail at 23m/s
1. Standard test conditions STC, irradiance of 1000W/m² at an AM1.5 solar spectrum and a cell temperature of 25°C
2. Normal operating cell temperature NOCT air temperature of 20°C, irradiance 800W/m², wind speed 1m/s
3. Power of solar cells varies in the normal course of production, the BP 3160, BP3155 are assembled using cells of slightly lower power than the BP3165.
4. The mechanical characteristics of the BP 3160, BP3155 and BP3165 are identical.

Quality and Safety

 

  • Manufactured in ISO 9001 and ISO14001 certified factories
  • Conform to European Community Directive 89/33/EEC, 73/23/EEc, 93/68/EEC
  • Certified to IEC 61215

Details

  • Model: BP 3165N
  • Shipping Weight: 15.4kg
  • Manufacturer:
    BP Solar