Energy Matters 130 Watt 12 Volt Solar Power Kit

 

Energy Matters designs a 130Watt 12Volt solar kit used for remote areas. This solar kit is perfect for the camper or tradesman who needs battery boosting on the go.

 

Kit Comprises Following Components

 

• 1 x Sharp 130 Watt 12 Volt solar module
• 1 x Morningstar Sunsaver 12Volt 10Amp regulator
• 2m of twin sheath cable
• 12m of Multi connect cable
• 10 amp fuse and holder

 

Sharp 130 Watt 12 Volt Solar Panel

  

• High-power module (130W) using 155mm square multi-crystal silicon solar cells with 13.1% module conversion efficiency
• Photovoltaic module with bypass diode minimises the power drop caused by shade
• Anti reflection coating and BSF (Back Surface Field) structure to improve cell conversion efficiency: 15.0%
• White tempered glass, EVA resin and a weatherproof film, plus aluminium frame for extended outdoor use
• Nominal 12 volt output for battery charging applications
• Output terminal: Wire with waterproof MC3 connectors
• Certifications: IEC 61215
• SHARP modules are manufactured in ISO 9001 certified factories

   

Warranty 

 

• Sharp 130 watt solar module provides 25 year warranty on power output
• Morningstar has 5 year warranty period

  

Sharp 130 Watt Solar Panel Technical Specifications

   

Maximum power - Pm	130 W
Minimum power - Pm	123.5 W
Open circuit voltage - Voc	22.0 V
Maximum power voltage - Vpm	17.4 V
Short circuit current - Isc	8.09 A
Maximum power current - Ipm	7.48 A
Module efficiency - ηm	13.1 %
Encapsulated solar cell efficiency	15.0%
Maximum system voltage	600 V
Cell	Multi-crystalline silicon
No of cells and connections	36 in series
Operating temperature	- 40 °C to + 90 °C
Storage temperature	- 40 °C to + 90 °C
Series fuse rating	15 A
Type of output terminal	Lead wire with connector
Dimensions	1491 x 672 x 46 mm
Weight	14.0 kg

* STC Standard Test Conditions:25°C 1 KW/m², AM 1.5

 

Morningstar Sunsaver 12Volt 10Amp Regulator

 

Morningstar's SunSaver is the world's leading small solar controller for both professional and consumer applications.
The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing:

 

• Automated production
• ISO 9002 quality programs
• Latest power electronic technologies
• Latest control and logic technologies
• High volume manufacturing

 

Morningstar Design Features

 

• 100% solid state
• Series design (not shunt)
• True 0 to 100% PWM duty cycle
• Set point accuracy to 35 mV
• Rated for 25% overloads
• Fully encapsulated in epoxy potting
• Marine rated terminals / anodized case
• Temperature compensation
• Sealed / Flooded battery select
• No need to derate
• Parallel for 40 amps or more
• Green charging / Red LVD indicators

 

Morningstar Technical Specifications

 

Electrical Characteristics
Rated Solar Input		10 A
Rated load		10 A
25 % current overload		5 mins
Regulation voltage	Sealed battery	14.1 V
	Flooded battery	14.4 V
Load disconnect		11.5 V
LVD reconnect		12.6 V
Temp compensation		-28 mV/ºC
Self consumption		6 to 10 mA
Operating temp		-40 to +85 ºC
Mechanical Characteristics
Wire size 5.2 mm²		Epoxy encapsulated
Anodized aluminum case		Weight 0.23 kg

What is PWM ?
Pulse Width Modulation "PWM" is the most effective means to achieve constant voltage battery charging by switching the solar system controller’s power devices. When in PWM regulation, the current from the solar array tapers according to the battery’s condition and recharging needs.

 

Downloads and Manuals

 

• Suntech 130Watt 12Volt brochure
• Morningstar 12Volt 10Amp brochure