Lorentz PS600 BADU Centrifugal Surface Pump
Please note: Lorentz has announced that LORENTZ solar panels must now be used with all Lorentz solar pumping systems.
- Maximum lift 14 m-Solar operation & 13m-Battery operation
- Maximum flow rate 15m³/h & 13m³/h
- Surface centrifugal pump for solar operation
- Simple installation
- Maintenance free, brushless DC motor
- High reliability and life expectancy
- Cost efficient pumping
LORENTZ was established in Hamburg, Germany and has been a quality designer and manufacture of Solar Pumps since 1993. Through the innovative electronic controlling, outstanding manufacturing quality and a simple design, Lorentz have managed to reduce the high cost of solar water pumping.
Applications
- Swimming pool water circulation through a filter system and thermal collectors
- Pond management
- Irrigation / Aquariums
- Removing salty water in salinity affected areas
Warranty
- Two years manufacturers warranty against defects in material and workmanship
Features
Controller PS600
- Controlling of the pump system and monitoring of the operating states
- Mounted at surface (no submerged electronic parts)
- Two control inputs for well probe (dry running protection), float or pressure switches, remote control etc.
- Automatic reset 20 minutes after well probe turns pump off
- Protected against reverse polarity, overload and high temperature
- Speed control, max. pump speed adjustable to reduce flow rate to approx. 30 %
- Solar operation: integrated MPPT (Maximum Power Point Tracking)
- Battery operation: low voltage disconnect and restart after battery has recovered
- Max. efficiency 92 % (motor + controller)
Pump End-PE BADU Top 12
- Mono block-type pump with integrated strainer tank
- Bellow mechanical seal is mounted on a plastic shaft protected sleeve
- Motor/pump shaft has no contact with fluid
- Total electric separation
- Strainer capacity approx. 3 l
- strainer basket mesh size approx. 3.2 x 2.6 mm
Motor ECDRIVE 600 BADU Top
- Brushless, maintenance-free DC motor
Technical Specifications
PS600 BADU Top12 | Solar Operation | Battery Operation |
---|---|---|
Maximum flow rate | 15 m³/h | 13m³/h |
Maximum lift | 14 m | 13 m |
Ambient temperature | -30 ºC to +45 ºC | |
Controller | PS600 | |
Input voltage | solar generator: nominal voltage 48-72 V DC open circuit voltage max. 150 V DC | Battery, DC source: nominal voltage 48 V DC |
Dimensions | 395 x 175 x 165 mm | |
Weight | 4.5 kg | |
Motor | ECDRIVE 600 BADU Top | |
Max power input | 600 W | |
Pump End | BADU Top 12 | |
Suction /max positive inlet lift | 3.0 m | |
Casing pressure | 2.5 bar | |
Max water temperature | + 60 ºC | |
Weight (motor + pump end ) | 8.7 kg |
Quality and Safety
- Pump casing, strainer basket: PP
- Flange, gland housing: PP TV 40
- Diffuser: PP TV 40
- Impeller: PA 66 GF 30 / PC
- Lid: PC, transparent
- Mechanical seal: carbon / ceramic /NBR
- Bolts: steel, galvanized
- Type of enclosure IP 54
Downloads and Manuals
Details
- Model: PS600badu
- Shipping Weight: 4.5kg
- Manufacturer:
Lorentz