Lorentz Etatrack Active 1000 Solar Tracking Systems

Lorentz tracking systems greatly improves the performance of your PV system. Trackers let the PV panels follow the course of the sun, so that the panel surface is always in an optimum angle to the sun rays. This guarantees highest efficiency.

• 1-axis, active solar tracker
• Total module surface max. 10 m², approx. 1.6 kWp
• Maintenance-free
• High reliability and life expectancy
• No failure prone light sensor
• Low power consumption, approx. 1.25 kWh per year
• No unnecessary tracking movements
• Designed to withstand wind speeds up to 150 km/h
• Cost-efficient tracking system

Applications

Single-axis solar tracking increases the energy return of solar modules, dependent on location by 25% to 35% per year in average, respectively up to 55% during the summer months.

• Remote homes
• Livestock
• Plantation irrigation
• Pool filtration
• Solar heating

Warranty

• 2 years manufacturer's warranty against defects in material and workmanship

Features

• Extremely reliable active tracking system
• Angle East-West: 90º, active
• Elevation angle: 0º - 45º, manually adjustable
• No separate sensors, it uses the modules as sensor
• Energy supply of tracking drive: 12 V nominal, max. 200 V (Voc) provided by one of the tracked modules
• Horizontal position at night
• Tracking in steps according to the daily sunshine duration
• Designed to withstand wind speeds up to 150 km/h
  NoteTracked PV systems for charging batteries require a small extra PV-module:
  • min. 12 V (nominal), max. 200 V (Voc)
  • for latitudes above 45o North: min. 10 Wp
  • for latitudes below 45o North: min. 5 Wp

Module Surface and Fixation

• 10 m² total module surface (up to 1.6 kWp, dependent on module type)
• fixation: stainless steel clips, fitting for most module types - no drilling of additional holes into the module frame

Mounting and Foundation

• Mounting pole: length 2.5m
• Surface concrete foundation approx 1.6 m³

Included in Delivery

• Frame and fixation elements made of steel, Zn-coated, stainless steel clips for modules
• Electronics inc. battery in plastic housing
• Linear motor
  
• Mounting pole

Packing Dimensions

• 4 boxes each 255 x 17 x 17 cm
• Total weight 320 kg
• Total volume 0.3 m³

Downloads and Manuals

• Lorentz etatrack1000 Brochure
• Lorentz etatrack1000 manual
• Lorentz etatrack controller manual
• Lorentz etatrack1000, 1500 DIY