Selectronic Sp Pro Series 24 Volt 2400 Watts Inverter Charger

Selectronic SP Pro Series 24 Volt 2400 Watts Inverter Charger

The Selectronic SP PRO SERIES has been designed from the ground up with the world market in mind. Using our 25 years of experience in the harsh Australian market, we have developed a product which will suit many different markets including; Off Grid, On Grid with back up, Marine, Mobile and Industrial. Featuring advanced thermal power management and super high speed digital signal processing, new standards have been set for reliability, features, surge capability and power density.

The SP PRO series will act as a low voltage grid feeding inverter and will provide back-up power to the load if grid electricityhas failed. The unit can also be configured to operate as an Interactive Inverter Charger, with fast preset configurations for either mobile or remote power system use.

SP Pro Series Features

Ratings @ 40?C
Low distortion sine wave Interactive Inverter Charger with grid feed ability
Advanced thermal techniques provide excellent high temperature performance
63 amp AC transfer switch with anti-chatter protection
Grid feeds with excess renewable
"Grid Lockout" setting can allow battery charging ôOff Peakö
Automatic changeover when grid fails without using a second inverter
World leading 300% surge capacity
True 100% charge capacity
Five stage battery charging with dual float points and adjustable temperature compensation
Simple LED display, with the AC LEDs directly powered from the monitored voltage
Redundant safety disconnect for pluggable operation
Plug and play or fully configurable via computer
Eighteen months of logged daily totals
Four months of sampled data at 30 minute sample rate
Adjustable 30/15/10/5/1 minute sample rate
Easy to use configuration/ monitoring software supplied standard
ôPartial state of chargeö control can minimise generator run time
Superbly quiet
All PCBs conformal coated with mil spec silicone
4 x addressable digital inputs and 2 x analogue inputs
2 x user definable shunt inputs
Low battery shutdown override in case of emergency
Discretionary load control
External solar regulator bypass function
2 x serial ports with power for accessories
Variable speed fan with service alert
Lifetime monitored capacitors with service alert
Warranty, 5 yrs + 2 for SP Pro accredited installers

SP Pro Series Specifications

SP PRO SERIES SPECIFICATIONS	SPMC 241ûAU	SPMC 481ûAU	SPMC 482ûAU
Nominal battery voltage	24 V	48 V	48 V
Continuous, output power @ 40?C	3500 W	4000 W	6000 W
Continuous, charge current @ 40?C	146 A	83 A	125 A
Continuous, output power @ 25?C	4000 W	4500 W	7000 W
Continuous, charge current @ 25?C	146 A	83 A	125 A
20 second load rating @ 40?C	10500 W	12000 W	18000 W
20 second output current @ 40?C	40 A	38 A	70 A
1 minute output power @ 40?C	7600 W	8700 W	13000 W
60 minute output power @ 40?C	3800 W	5300 W	8000 W
DC input voltage range	20 - 34 V	40 - 68 V	40 - 68 V
TRANSFER SWITCH
AC transfer current capacity	63 A
Max AC input source, (generator) W	15 kW
Max total output to Load, AC source + inverter	15 kW
AC transfer time	no-break
Battery charger type	5 stage, power factor corrected with dual stage float
DC consumption idle	6 W
Standby (adjustable rate)	12 - 20 W
ON with no load	36 W	37 W	40 W
Peak efficiency û all modes	95%	95.5%	96%
10% load	90.5%	91%	91%
20% load	93%	94%	94%
50% load	94.5%	95%	95.5%
100% load	91%	92.5%	93%
Max Grid Feed capacity	rated output
AC OUTPUT standalone
Setting accuracy	210 to 240 V+/- 1%
Regulation	<2% droop @ 0-200% rated load (<5% 0-300%)
THD	<3% @ 0-200% rated load
Frequency	50 or 60 Hz +/-0.005% standalone
AC SOURCE (input)
Nominal voltage	210 to 240 V~
Tolerance on nominal voltage	programmable - 1% to 15%, + 1% to 10%
Nominal input frequency	50/60Hz
Tolerance on nominal frequency	programmable +/- 1% to 10%
Generator can be started by	battery SoC, DC voltage, battery load, unit temperature, time & remote control
Battery temperature sensor	Yes
Mid point battery voltage sensing	Yes
Inverter display	22 x LEDs with auto adjusting intensity. Display indicates: charger status, remaining useable battery capacity, alarms, AC status. AC status LEDs powered from AC voltage. Generator control button. Output mode button. Alarm silence button.
Digital Inputs	4
Shunt Inputs	2 user definable: +/-75mV
Analogue Inputs	2 general purpose logged 0-60V
Relay Outputs	4: 60 V, 500 mA
Digital outputs	3: 60 V, 5 mA
Communication ports	2: RS232 with adjustable baud rate of up to 57600
Memory retention of settings & data	permanent
SP LINK configuration and monitoring software	Standard. Allows remote configuration of parameters and viewing of LED & digital displays
Dimensions (mounted)	345 W x 545 H x 215 D
Weight	34 kg	35 kg	40 kg
Circuit Breakers	double pole 63A for both AC Source and AC Load
Standards	EN61000-6-3 2007, AS3100 2002, AS3877 2005 (grid connect)
Protection	IP43
Warranty	5 years + 2 years when installed by a Selectronic SP PRO accredited installer (conditions apply)
Through a policy of continual improvement, specifications may differ from those shown. All ratings are at 25?C and nominal battery voltage unless otherwise stated and are correct as at Feb 2009.

Downloads and Manuals

Selectronic SP Pro Inverter charger brochure

Details

Model: SPMC á 241¹AU
Shipping Weight: 34kg
Manufacturer:
Selectronic

Product 16/18