Steca Automatic Selection 12V/24V 30A Solar Regulator - SSC30
Steca’s Solarix series is the world’s most sold PV charge controller for the use in medium sized solar home systems and PV power supplies in the range of 8 to 30 Amp (up to 900 Wp). The heart of the controller is the integrated circuit called ATONIC®, which contains the regulation software based on a self learning algorithm. The result is an accurate state of charge (SOC) metering of the battery, the best insurance for a long battery lifetime.
Features
- PWM shunt battery charging
- state of charge (SOC) battery regulation
- boost charging
- equalising charge
- float charging
- automatic load reconnection
- automatic selection of voltage (12 V / 24 V)
- temperature compensation
- positive grounding or negative grounding on one terminal
- field adjustable parameters by jumpers on PCB
- option: operates load only by night
Electronic Protections
- High voltage disconnect (HVD)
- Low voltage disconnect (LVD)
- Dept of discharge disconnection (DOD)
- Reverse polarity of solar modules
- Reverse polarity of load & battery
- Electronic fuse
- Short circuit of solar modules
- Short circuit of load
- Over temperature
- Over voltage
- Lightning protection by varistor
- Low electronic interference (EMC)
- Open circuit battery
- Reverse current at night
Technical Specifications
| Solar charge controller with LED | Omega |
| System voltage | 12V /24V |
| Max module input short circuit current | 30 A |
| Max load output current | 30 A |
| Max self consumption | 5 mA |
| End of charge voltage float | 13.7 V /(27.4 V) |
| Boost charge voltage | 14.4 V / (28.8 V) |
| Equalisation charge (deactivated for gel accu) | 14.7 V / (29.4 V) |
| Reconnection setpoint (SOC/LVR) | >50 % SOC / 12.6 V (25.2V) |
| Deep discharge protection (SOC / LVD) | <30 % SOC / 11.1 V (22.2V) |
| Ambient temperature allowed | -25 ºC to +50 ºC |
| Terminal size (fine / single wire) | 16 mm² / 25 mm² |
| Enclosure protection class | IP 22 |
| Weight | 420 g |
| Dimensions | 188L x 106W x 49H mm |
Quality and Safety
- approved for World bank funded projects in Indonesia by TÜV
- listed for World bank funded projects in Bangladesh, China, Laos, Nepal, Sri Lanka, Uganda
- certificate ONE / KfW funded projects in Morocco
- compliant to the use in tropical areas (DIN IEC 68 part 2-30)
- conform to European Standards (CE)
- UL listing in 1999
- Made in Germany
- TÜV World bank spec
- ThermieB: SUP-995-96 (Morocco)
- manufactured in a DIN EN ISO 9001:2000 and DIN EN ISO 14001 facility
Downloads and Manuals
Details
- Model: SSC30
- Shipping Weight: 0.42kg
- Manufacturer:
Steca
