Outback Maximum Power Point Tracker 60A multi-voltage

larger image

Model:
MX60
Shipping Weight: 5.3kg
Manufacturer:
Outback Power Systems
Available
(call for delivery time)

$1,406.00 $1,198.00
Buy online & save $208.00
Note: this product
may be eligible for
added rebates!

Buy with confidence!

Secure online shopping

OutBack MPPT Battery Charge Management System - MX60

Please note: the MX60 has been superseded by the Outback FM60

The OutBack MX60 Maximum Power Point Tracking (MPPT) charge controller enables your PV system to achieve its highest possible performance. Rated for up to 60 amps of DC output current, the OutBack MX60 can be used with battery systems from 12 to 60 Volts DC with PV open circuit voltage as high as 125 Volts DC. The MX60's setpoints are fully adjustable to allow use with virtually any battery type, chemistry and charging profile.

The OutBack MX60 comes standard with an easy to use and understand display of the PV systemÆs performance. The four line, 80 character, backlit LCD display is also used for programming and monitoring of the systemÆs operation.

OutBack Power Systems is an engineer-owned, customer focused, power systems equipment manufacturer. Our engineers all have decades of power conversion design and equipment installation experience. We share a passion for leading the industry into a new era of balance of systems equipment performance, ease of use, and standardization. Our mission is to be a leading manufacturer of power electronic products for renewable energy, back-up power and vehicle applications. The goals for OutBack Power Systems is to offer high value product with the best possible performance while operating reliably in severe environmental conditions. OutBack Power System's goal is also to support our customers and their applications with an exceptional level of technical support and customer service.

Warranty

Two years standard warranty, plus optional 5 Year Extended Warranty

Technical Specifications

Nominal Battery Voltages		12, 24, 32, 36, 48, 54 or 60 VDC (Single model - selectable via field programming)
Output Current		60 amps maximum with adjustable current limit for smaller systems
Maximum Solar Array Size		12 VDC systems 800 Watts / 24 VDC systems 1600 Watts / 48 VDC systems 3200 Watts
PV Open Circuit Voltage (VOC)		150 VDC absolute maximum coldest conditions / 140 VDC start-up and operating maximum
Standby Power Consumption		Less than 1 Watt
Charging Regulation		Five Stages: Bulk, Absorption, Float, Silent and Equalization
Voltage Regulation Set points		10 to 80 VDC user adjustable with password protection
Equalization Voltage		Up to 5.0 VDC above Absorb Set point Adjustable Timer - Automatic Termination when completed
Battery Temperature Compensation		Automatic with optional RTS installed / 5.0 mV per ?C per 2V battery cell
Voltage Step-Down Capability		Can charge a lower voltage battery from a higher voltage PV array
Power Conversion Efficiency	Typical	98% at 60 amps with a 48 V battery and nominal 48 V solar array
Status Display		3.1" (8 cm) backlit LCD screen with 4 lines with 80 alphanumeric characters total
Remote Interface		Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
Data Logging		Last 64 days of operation - amp hours, watt hours and time in float for each day along with total accumulated amp hours, kW hours of production
Hydro / Wind Turbine Applications		Consult factory for approved turbines
Positive Ground Applications		Requires two pole breakers for switching both positive and negative conductors on both solar array and battery connections (HUB-4 and HUB-10 are not recommended for use in positive ground applications)
Operating Temperature Range		Minimum -40? to maximum 60? C (Power capacity of the controller is derated when above 25? C)
Environmental Rating		Indoor Type 1
Conduit Knockouts		Two ¢" and ¥" on the back; One ¥" and 1" on each side; Two ¥" and 1" on the bottom
Warranty		Standard 2 year / Optional 5 year
Weight	Unit	11.6 lbs (5.3 kg)
	Shipping	14 lbs (6.4 kg)
Dimensions (H x W x L)	Unit	13.5 x 5.75 x 4" (40 x 14 x 10 cm)
	Shipping	18 x 11 x 8" (46 x 30 x 20 cm)
Options		Remote Temperature Sensor (RTS), HUB and MATE