Camp Power Deluxe Complete 140Watt Solar Power System

 

Instant camping freedom! An effective, portable and economical power system for use with 12 volt loads. This kit is capable of producing and storing 30Ah of energy per day*. This means being able to run (each day) a couple of 10w camping lights for 3 hours, a laptop computer for 1 hour, an efficient LCD TV for 3 hours, and an efficient 12v camping fridge!

 

Deluxe Solar Power Camping Kit Includes:

 

• 1 x 140w Suntech folding panel (2 x 70w panels) and heavy duty canvas bag to protect panels during transport
• 10m of cable to allow placement of the panel in a sunny location
• 1 x Morningstar Sunsaver 12 volt 10 amp solar regulator
• 1 x Haze 12 volt 100 Ah Pure Gel VRLA Deep Cycle Battery mounted in carry box
• Resettable circuit protection and wiring loom assembled to Australian Safety Standards.
• 2 x cigarette lighter sockets for connection to standard campsite appliances and 12v devices/chargers.

 

No complicated wiring required; the kit is ready to plug and play and will begin charging the battery the second the panel faces the sun! If the weather turns cloudy, the battery will store enough energy to keep your campsite comfortable for 48 hours (given the load described above).

 

*Daily energy production depends on weather conditions and time of year: the quantity of energy produced each day is based on average Australian climate data.

 

Warranty Information

 

• The Suntech 140w folding kit has a 25-year performance warranty
• The Morningstar Sunsaver 12v 10A regulator has a 5 year warranty
• The Haze Gel N70 100Ah battery has a 1 year warranty
• A materials and workmanship warranty of 1 year for hardware assembly

 

Suntech Solar Module Technical Specifications

 

Electrical Characteristics
Maximum Power at STC - Pm	140 Wp
Open circuit voltage - Voc	21.0 V
Optimum operating voltage - Vmp	17.0 V
Short circuit current - Isc	9.5 A
Optimum operating current - Imp	8.24 A
Operating temperature	- 40 ?C to + 85?C
Maximum system voltage	1000 V DC
Mechanical Characteristics
Cell	Monocrystalline Silicon Solar Cell 125mm x 125mm
No. of Cells and Connections	36 (4 x 9) Cells in series
Dimensions	1342 x 770 x 30 mm "Operating"	771 x 665 x 65 mm "Storage"
Weight	16.0 kg

 

Morningstar Sunsaver 10A Regulator Features

 

• 100% solid state
• Series design (not shunt)
• True 0 to 100% PWM duty cycle
• Set point accuracy to 35 mV
• Rated for 25% overloads
• Fully encapsulated in epoxy potting
• Marine rated terminals / anodised case
• Temperature compensation
• Sealed / Flooded battery select
• No need to derate
• Parallel for 40 amps or more
• Green charging / Red LVD indicators

 

Morningstar Sunsaver 10A Regulator Technical Specifications

 

Electrical Characteristics
Voltage		12 V
Rated Solar Input		10 A
Rated load		10 A
25 % current overload		5 mins
Regulation voltage	Sealed battery	14.1 V
	Flooded battery	14.4 V
Temp compensation		-28 mV/?C
Self consumption		6 to 10 mA
Operating temp		-40 to +85 ?C
Mechanical Characteristics
Wire size 5.2 mm?		Epoxy encapsulated
Anodised aluminium case		Weight 0.23 kg

 

Haze Gel N70 100Ah Deep Cycle Battery In Carry Box Features

 

• Weight: 25Kg
• Maintenance-free. Never top up acid again. Allows installation in confined areas.
• Resistant to under-bonnet heat, vibration and heavy discharge cycles.
• More available Ampere-Hour (Ah) capacity than the equivalent size flooded cell battery.
• Non-spillable. No more leaks or topping up. No more rusted battery trays. No risk of chlorine gas production in boats.
• Low self-discharge. Can be stored and used in seasonal or infrequently used vehicles without going "flat".