PowerRouter Solar Battery Inverter With Island Mode!
Available in 3kW, 3.7kW and 5kW capacity and ideal for use in areas with feed in tariffs or where mains power failure frequently occurs, the Solar Battery version of PowerRouter exports electricity back to the grid while ensuring your deep cycle battery bank remains charged and your lights stay on - even if your neighbours' aren't!
In a mains power failure situation, traditional inverters usually shut down - but the PowerRouter Solar Battery Inverter by Nedap automatically switches over to "island mode" in less than a second to isolate it from the mains grid; while continuing to supply power to your premises and batteries.
Just add your solar panels, deep cycle batteries and you're set to go - no extra inverters or cables are necessary; it's all integrated in this unit!
PowerRouter Solar Battery Features
- Available in 3.0kW, 3.7kW and 5.0kW configurations
- Solar battery manager integrated
- Compact, fully integrated system
- Compatible with all PV solar panels
- 2 independent MPP trackers maximise yield
- Backup power supply integrated
- Easy install and built-in wizard
- Web based monitoring and management
Solar Battery PowerRouter Specifications
Grid |
PR50SB-BU |
PR37SB-BU |
PR30SB-BU |
Continuous output power at 40 °C (P nom) |
5000 Wac (4600 Wac DE) |
3700 Wac |
3000 Wac |
AC output current |
22A |
16A |
13A |
AC output voltage (nominal) |
230 Vac ± 2%, 50 Hz ± 0.2%, true sine wave <3% THD, single phase |
||
AC output range |
180-264 Vac 45-55 Hz (limited by local anti-islanding regulations) |
||
Protection |
electronic, fused |
||
Standby losses |
≤ 6W |
||
User interface |
interactive display with 4-button operation |
||
Connectivity |
ethernet RJ45, TCP/IP |
||
Backup switch over time |
<1 second |
||
Solar |
PR50SB-BU |
PR37SB-BU |
PR30SB-BU |
Max. Input |
5.5 kWp and 15 A per string |
4 kWp and 15 A per string |
3.3 kWp 15 A |
No. of strings |
2 |
1 |
|
No. of MPP trackers |
2, fully independent |
2, fully independent |
1 |
DC Disconnection switch |
4-pole, 600V, 15A |
4-pole, 600V, 15A |
2-pole, 600V, 15A |
Solar Voltage |
150 – 600 Vdc per string |
||
MPP Voltage |
100 – 480 Vdc per string |
||
Solar Connections |
MC4 |
||
Max. Efficiency |
94.5% |
||
Max. MPP Efficiency |
99.9% | ||
Battery |
PR50SB-BU |
PR37SB-BU |
PR30SB-BU |
Output charge current |
25 - 200 A continuous, |
25 - 155 A continuous, |
25 - 125 A continuous, |
programmable |
programmable |
programmable |
|
Battery types |
Gel, AGM, NiCd, Li-ion |
||
Battery voltage output range (Vout) |
18 – 32 Vdc |
||
Battery capacity |
min. 100 Ah, at 25A charge current |
||
Charging curve |
float or 3-stage adaptive with maintenance |
||
Short circuit protection |
electronic, at max. charge current, switch off <1 sec |
||
Multipurpose relay |
2 (NO/NC, 250 Vac, 1 A, 24 Vdc, 5 A) |
||
Battery temperature compensation |
included |
||
Battery voltage sense |
included |
||
Current shunt |
included |
||
Environmental |
PR50SB-BU |
PR37SB-BU |
PR30SB-BU |
Operating Temperature Range (full power) |
-10 °C to +50 °C (derating from 40 °C) |
||
Storage Temperature |
-40 °C to +70 °C |
||
Humidity |
maximum 95%, non-condensing |
||
Regulatory Approvals and Standards |
CE |
||
Safety |
EN 60950-1, EN 62109-1, EN 60335-2-29 |
||
Emission |
EN 55014-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-3 |
||
Immunity |
EN 55014-2, EN 61000-6-2 |
||
Anti Islanding Protection |
VDE 0126.1.1, G83/1(UK), RD1663/2000(ESP), DK5940 E.d. 2.2 (IT), AS3877(AUS) |
||
(check www.PowerRouter.com for other country certifications) |
|||
Warranty |
five years (optional: extension to ten years) |
||
General |
PR50SB-BU |
PR37SB-BU |
PR30SB-BU |
Dimensions (WxHxD) |
765 x 502 x 149 mm |
||
Protection Category |
IP 21 |
||
Weight |
20.5 kg |
||
Topology |
galvanic isolated transformer |
||
Cooling |
forced airflow |
PowerRouter Solar Battery Inverter Downloads
Details
- Model: PR50/37/30SB-BU
- Shipping Weight: 20.5kg
- Manufacturer:
Needap Energy Systems